Archive Home arrow Reviews: arrow Cooling arrow Best CPU Cooler Performance Intel/AMD Q1-2010

Best CPU Cooler Performance Intel/AMD Q1-2010 E-mail
Reviews - Featured Reviews: Cooling
Written by Olin Coles   
Saturday, 13 March 2010
Table of Contents: Page Index
Best CPU Cooler Performance Intel/AMD Q1-2010
Thermally Conductive Element Reference
3R-System IceAge Prima Boss-II
Cogage Arrow CPU Cooler
Coolink Corator-DS Heatsink
CyberPowerPC XtremeGear HP-1216B
Dynatron Genius-G950 Heatsink
Intel DBX-B Advanced Thermal Solution
Noctua NH-D14 140mm Cooler
ProlimaTech Armageddon Heatsink
Thermalright Venomous-X Heatsink
Thermaltake Contac-29 CLP0568
Xigmatek Balder SD1283 Cooler
Zalman CNPS10X-Performa Cooler
Zalman CNPS10X-Quiet Cooler
CPU-Cooler Preparations
Heatsink Test Methodology
AMD X4-965: Stock Cooling Fan
AMD X4-965: High-Output Fan
Intel 980X: Stock Cooling Fan
Intel 980X: High-Output Fan
Enthusiast Fan Comparison
CPU Cooler Final Thoughts
Best CPU Cooler Conclusion

Best CPU-Cooler Performance

Overclocking is a lot like skydiving and break dancing: not everyone does it, but it's really fun for those of us who do. There's a level of overclocking for every enthusiasts, from simple speed bumps to the record-breaking liquid nitrogen extreme projects. Overclocking is addictive, and before you know it the bug has you looking at hardware that might cost as much as a low-end computer system. Allow me to stand and tell you my name is Olin Coles, and I'm an overclocker. I'm not ashamed; at least not for being a PC-hardware enthusiast... but my occasional leap from an airplane or casual windmill-to-poplock is another story.

Overclockers demand only the best performance from their computer hardware, which is why the aftermarket heatsink industry is thriving with competition. Using both the overclocked 140W AMD Phenom-II X4-965 BE and six-core Gulftown Intel Core i7-980X Extreme Edition processors, Benchmark Reviews tests several new thermal solutions for our Best CPU Cooler Performance Intel/AMD Q1-2010 article. Notable entries include the ProlimaTech Armageddon, Cogage Arrow, Noctua NH-D14, Thermalright Venomous-X, and Zalman CNPS10X-Performa.

Two desktop processors stand at the forefront of enthusiast wish-lists: AMD's Phenom-II X4-965 CPU and Intel's Core i7-980X Extreme Edition "Gulftown" 6-core processor. In response to requests from our community, Benchmark Reviews decided it was time to give AMD their time in our Best CPU Cooler Performance series. So in this Best CPU Cooler Performance Q1-2010 article, an overclocked AMD Phenom II X4 965 "Black Edition" processor was used (original 140W version), and given a heart-warming 1.55 volts to the vCore so it could reach 4000MHz (4GHz) stable. Likewise, our hexa-core Intel Core i7-980X Gulftown received 1.375V for a stable-but-warm 4.0GHz overclock on the capable ASUS P6X58D-Premium motherboard.

This article is huge, and lets face it, you're probably going to skip directly to the results. Fight the urge! Please take the time to read this entire article to best absorb all of the information contained. I've put a lot of time into this work, and not everything is revealed in the charts.


Computer hardware is an ever-evolving industry, and since Moore's law only applies to an exponentially growing transistor count then there should probably be another law for cooling. In the very recent past there have been two major trends which have accelerated the performance potential of CPU cooler. That first development was the use of heat-pipes to directly contact with the CPU surface; which resulted in the Heat-pipe Direct Touch technology. The second development is by no mean a new concept, just new to our industry in specific. For many years now heatsinks have been full of right angles, but very recently companies have begun to recognize the need to disrupt smooth airflow and reduce the laminar skin effect which allows air to travel just above the solid surface. Some manufacturers have used at least one of these new concepts in their product design, and only a few are beginning to incorporate both. Benchmark Reviews will see how much this affects the overall performance as we test a large segment of enthusiast cooling products.

Benchmark Reviews strives to offer the overclocker and PC-hardware enthusiast community solid evidence reflecting the true performance of computer products through rigorous testing and evaluation. I personally understand that many of the readers who visit Benchmark Reviews have been involved with other community websites for several years, and therefore take our test results personally. So now that our test process has been reworked, we have collected the most complete source of benchmark results possible and gathered in a controlled environment. The purpose of this article from our quarterly series is to document performance and declare the best CPU coolers available for the Intel LGA1366 and AMD AM2/AM3 sockets as of Q1-2010.

Before the Intel Core i7/X58 platform arrived, the Core 2 Duo and Core 2 Quad processors did their part to separate the cream of the crop from our large collection of LGA775 coolers. In a previous Best CPU Cooler Performance article, Benchmark Reviews retired the LGA775 platform from its testing duties and made room for the up-and-coming LGA1366 socket. It didn't take long to collect several CPU coolers designed for the Intel Core i7 CPU & X58 platform. It's a mistake to think that any LGA775 cooler can do just as well with the new LGA1366/Core i7 platform; primarily because the size and location of processor cores has changed.

New AMD Test Products

New Intel Test Products

  • 3R-System IceAge Prima Boss-II IA-120B2
  • Coolink Corator-DS
  • CyberPowerPC XtremeGear HP-1216B
  • Dynatron Genius-G950
  • Noctua NH-D14
  • Thermaltake SpinQ-VT CLP0554
  • Thermaltake Contac-29 CLP0568
  • Xigmatek Balder SD1283 CAC-SXHH3-U06
  • Zalman CNPS10X-Quiet
  • Zalman CNPS10X-Performa
  • 3R-System IceAge Prima Boss-II IA-120B2
  • Cogage Arrow
  • Coolink Corator-DS
  • CyberPowerPC XtremeGear HP-1216B
  • Intel DBX-B Advanced Thermal Solution
  • Noctua NH-D14
  • ProlimaTech Armageddon
  • ProlimaTech Megahalems Revision-B
  • Thermalright Venomous-X
  • Thermaltake Contac-29 CLP0568
  • Xigmatek Balder SD1283 CAC-SXHH3-U06
  • Zalman CNPS10X-Quiet
  • Zalman CNPS10X-Performa

Previous Top Performers

Honorable Mention

Before we inspect each member of our new CPU cooler collection, let's establish that our tests consist of methods we have determined to be the best for our one singular purpose. Our methodology isn't written in stone, and could very likely be changed or modified as we receive justification (and feedback from the community). Our scope is limited to stand-alone products only, meaning those products which can be installed and operated without additional critical components needed or kit construction. This generally excludes most commercial liquid cooling systems, which may potentially offer better performance than the products we test for this article but require components to be assembled from various options and equipment. Suffice it to say, the vast majority of gamers and enthusiasts are using air-cooled solutions and therefore we target this review series towards them. We encourage hardware enthusiasts to utilize the equipment available to them, and select the cooling fan that best suits their needs. Just keep in mind that exceptional cooling performance must begin with the CPU cooler, and end with the cooling fan. It's the foundation of the unit that makes a difference, which is exactly what we're after in this article.



# Is your final "Best" suitable?Rod 2010-03-14 03:52
The best cooler you have chosen, is that the best for a Desktop case or tower case or is there no difference in mobo orientation (Horiz/Vert) ??
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Olin Coles 2010-03-14 08:07
All of these coolers were tested in the tower case, with the heatpipes spanning vertically from front to back and exhaust blowing towards the top of the case.

HTPC/Desktop cases which rest horizontally and position the heatsink upright will have slightly better results.
Report Comment
# RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Dr_b_ 2010-04-01 14:09
I Was wondering if you had any pictures showing the orientation. For example, you had a push fan on the lower side of the heatsink, pushing air up through the heatsink towards the top of the case ( i guess because heat rises and why fight that) but don't you lose any direct air flow blowing down on the cards/nb?
Report Comment
# Fan orientationOlin Coles 2010-04-01 14:26
In our tests the fan was attached to the bottom of the heatsink, and pushes air from the bottom of the cast to the top. If two fans were ever used, it simply adds a second fan for a push and pull effect.
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Stuart 2010-03-20 04:29
Delta T - Degrees C/W ?
Report Comment
# Is that a question?Olin Coles 2010-03-20 10:23
I see the question mark, but what exactly are you asking?
Report Comment
# too heavyBrody k 2010-03-20 15:57
I've heard reports of people claiming that these larger heatsink wil. l eventually bend your mobo resulting in your 1st dimm to lose contact. you can reseat the ram and support the cooler im sure. any comment?
Report Comment
# Cogage Arrow heatsinkChris H. 2010-03-23 15:17
I looks like that the Cogage Arrow heatsink has spots for 3 fans. Is this true and do you think that 3 low noise fans will make a big impact in performance?
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Steven 2010-03-23 18:15
I can't find a difference between the Zalman Flex and Performa, aside from looks and the Performa comes with a fan, which doesn't make sense considering the Flex costs more. Can you tell me what the differences are and why the Flex is more expensive, and if you would expect them to perform equally or not?

I'm trying to decide between the Prolimatech, Scythe, and Zalmans. I like the Prolimatech for the best performance and the Scythe for almost equal performance but much cheaper. The Zalman's are nice because they're in the middle for cost, although they perform worse yet cost more than the Scythe (unless the Flex performs better than the Performa). My main concern with the Scythe is you mentioned a "giant hassle for installation." Can you elaborate on that or point me to a link where it's discussed?

For an i7-920/930 build with intent to OC to the 3.8-4.0 range, which of these four would you suggest, or do you think they would all be up to the task?
Report Comment
# RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Olin Coles 2010-03-23 20:44
The details on the Mugen installation are in the article, along with my suggestions for the best cooler between those choices. I haven't received or tested the Zalman CNSP10X-Flex, so I can't properly comment.
Report Comment
# mrBrody K 2010-03-23 18:44
the Cogage Arrow heatsink will support 3x120mm fans. it will likely drop them temp a degree or two.

I would order and i did, should be here tomorrow, Prolimatech megahelms. I am waiting to see what they give me for a fan (it comes with one now) before i order Noctua NF-P12-1300 120MM fans. From what i can tell they have the best static pressure available, exactly what you need to blow through that rad.

promlimatech / noctua fans. my 2 cents
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Steven 2010-03-24 08:07
I know which one you said is the best cooler (the Prolimatech), and I'm fully aware that it's the best choice if nothing but temps matter. But then, if that were the case, I could just as well set up a water cooling system. What I'm trying to decide is if it's worth spending twice as much for a difference of a few degrees. If I were trying to push my OC to the limit and go with an extreme speed of 4.2GHz+, then I'm sure it would come down to those few degrees making a difference. However, for "only" shooting for ~3.8-4.0, it seems the Scythe would be enough, and I was just looking for your opinion on it, seeing as you have much more experience than I do in the topic.

As for the Mugen install, I've looked through the article over and over and I can't find what you're referencing. There's not even an entry in the article index for the Scythe. I guess I'll just have to check out other reviews on it elsewhere to see if anyone else mentions anything.
Report Comment
# Mugen-2Olin Coles 2010-03-24 08:40
It sounds like the Scythe Mugen-2 would be your best choice; and installation means removing the socket hardware and using theirs.
Report Comment
# Scythe Mugen-2 Revision B SCMG-2100Olin Coles 2010-03-24 15:17
EDITOR'S NOTE: The Scythe Mugen-2 Revision B model SCMG-2100 heatsink is identical to the first version, model SCMG-2000. The only difference is that Mugen-2 Rev. B uses a newly developed F.M.S.B. (Flip Mount Super Back-Plate) for more convenient mounting onto the motherboard. There should not be any cooling performance between these two models, despite marketing hype.
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Brad 2010-03-27 14:23
How can you hook up 2 CPU fans if the motherboard only has 1 CPU fan connector. Should I use a case fan slot for the second one? The case fans in my Cooler Master 932 HAF all can connect to the PSU cables, so that would be possible.
Report Comment
# Read the articleOlin Coles 2010-03-27 14:28
You're asking a question that's already answered in the article. All of the fans are connected directly to the PSU, not the motherboard.
Report Comment
# RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Steven 2010-03-27 14:53
I would suggest using a splitter/y-cable, such as the one at This way you can let the fans be controlled by the motherboard, slowing down when maximum cooling isn't required.
Report Comment
# RE: RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Brad 2010-03-27 15:31
I didn't see this covered in the article, though I must have missed it. The article led me to buy the Megahalems. Is it safe to connect 2 fans to the same motherboard connector?

I have a P658D Premium motherboard. Could/should I just connect the second fan to one of the extra case fan connectors? As I noted, the case fans could possibly all connect to the PSU directly since they have adapters for that.
Report Comment
# RE: RE: RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Olin Coles 2010-03-27 19:58
You can connect the fans to any power header that's on the motherboard; even if it doesn't say CPU. You can also use an adapter to connect via molex PSU plugs.
Report Comment
# RE: RE: RE: RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Brad 2010-03-27 20:31
Any suggestions on where to find more information about molex plugs? What do they add to a setup, why shouldn't I use them? I notice the connect to the MB and the PSU directly. Though I guess using a splitter with those might allow the MB to control them, but keep from pulling too much power from the MB.
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Steven 2010-03-27 16:34
I would suggest you read the thread at as well as maybe doing some more searching on your own. Based on what is said there, and the fact the splitters exist in the first place, I would suggest it's more than likely perfectly fine to do it. If you have doubt and really want to set it up that way, or you are just curious, I recommend you figure out the current draw of whatever fans you plan to use and either do some searching to see if you can find out what success others have had with fans with similar draw running in parallel off a single header or contact ASUS and ask them what the CPU_Fan header is rated at. If you do find out, or if you try it and it works, try to follow up and report your findings, as while I'm fairly certain it will work, I'd like to know for sure.
Report Comment
# RE: RE: Best CPU Cooler Performance Intel/AMD Q1-2010Brad 2010-03-27 20:33
I have learned that something may not be good, even if it exists. I am concerned with trying to pull too much power from the MB. I have come across a few things (though I have a hard time making a good Google search for the topic) about the possibility of damage.

I will check out the site. Contacting ASUS is in my list, but I want to build the box this weekend, not wait until Monday. :)

One of the fans makes a horrid noise, so I am only running with the push now, so the problem is gone for a while.
Report Comment
# OK?Zack 2010-04-02 09:32
My previous comments were deleted, so I'll try one more time.

On the AMD X4-965 Stock Cooling Fan page the writer listed the NH-D14 with two 140mm fans. The NH-D14 comes with a 120mm and 140mm fan (NF-P12 and NF-P14), not two 140mm fans.

On the Intel 980x Stock Cooling Fan page it's also listed with "2x 140".

On the AMD X4-965 High-Output Fan page the NH-D14 is again for some strange reason listed with "stock 140mm fans" as opposed to having the Yate Loon 88 CFM fans mounted on it like every other cooler on the page.

On the Intel 980x High-Output Fan page the writer mentioned that the NH-D14 had two Xigmatek 140x140x25mm XLF-F1453 fans (63.5 CFM) mounted instead of the Yate Loon (88 CFM) fans mounted on every other cooler except the Prolimatech Armageddon, which also had the Xigmatek fans mounted.

I thought it was supposed to have the Yate Loon fans installed as per the test methodology?
Report Comment
# By the wayZack 2010-04-02 14:34
You have my sincere thanks for going through the trouble of reviewing all these coolers. I should have posted my thanks first :)
Report Comment
# Thuban Surface AreaKGA 2010-04-02 18:42
Excellent review, and much still for me to reflect on but have you any details on the size of the Thubans? I'm curious if the Scythe Mugen-2 would have great surface to surface contact on these upcoming processors. Also I couldn't help but notice that you are not a fan of certain high CFM fan's on the market. How about this Delta with PWM? It's 35 bucks and may cool enough for great OC'n for a Thuban/Scythe Mugen-2 combo.

I only ask because in the Q1 review you did not test the AMD Phenom-II X4-965 BE or Intel Core i7-980X Extreme Edition with the 'showdown' between the Yate Loon fan on these CPU's vs... another fan.
Report Comment
# link Correction!KGA 2010-04-02 18:45
Let me try that link again:

that's better.
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Robert Lazarus 2010-04-07 18:46
There is a lot of info and obviously one size does not fit all. I am still trying to figure out which cooler for the heat signature of the gulftown chip on an asus P6x58D board so I can still use all of the memory and pci slots. Does not have to be the absolute coolest, but decent and easy to install.

Report Comment
# ProlimaTech MegahalemsOlin Coles 2010-04-07 19:13
Robert: You'll want the ProlimaTech Megahalems. It cools best, but also allows full access to all DIMM slots and is nowhere near the PCI slots.
Report Comment
# Finally found the Thuban die size..KGA 2010-04-17 02:34
And it's very large. It's 346mm². I am unaware of any Air Cooler that has a contact base even close to that size -that's also AMD compatible.

I'll have to use the stock cooler until I find another option.
Report Comment
# RE: Best CPU Cooler Performance Intel/AMD Q1-2010Cougar75 2010-04-17 06:52
On page 10 you show the "width" of the Armageddon as 60mm (not 50mm). Is this correct?
Report Comment
# Q1 roundup best coolers.horsey 2010-05-04 18:38
I read through pages and pages and pages, at the end, no charts :(
where are the #ing charts?
Report Comment
# Look harder... lolOlin Coles 2010-05-04 20:53
The charts are there. I'm not even sure how you missed them.
Report Comment
# artist in residenceBarry Prager 2010-05-08 10:24
Excellent. Well executed and written article on the top preforming coolers. One tip I'll take advantage of is reorienting my Noctual NH-D14 so the exhaust blows up and not toward the back. You explanation makes sense and I've got a larger fan pointing out on the top of my Coolmaster HAF 932.
Report Comment
# ThanksOhSoCheesy 2010-06-06 10:46
Thanks! Great article. I'm glad you "made" me read the whole thing. I did learn a lot that wouldn't be in the conclusion.
Report Comment
# what happend to noise lvl ?FInn 2010-06-14 04:12
here i thought i could find out, what my next heatcooler would look like!!!

but, but.. it seems like this test purpurce it overclockers, because, nothing about noise lvl. at least i could not find it!!!

when i am looking for coolers, i always look for, what temperature, can it hold the cpu, at lowest rpm, and the cpu working. ( with supported fan )

a lot of ppl hates noice more than been able to overclock. there for the lowest rpm combined with the cpu working, is a good indication, on what coolers can do the work and wich one, only are for high rpm cooling.

so the noice lvl, is at least as important as temperature. and it should be about 50celcius or lower, by normal use.
( still at lowest rpm. )
my zalmon copper cooler, can still do the job, at lowest rpm with my old cpu ( i almost cant hear it )

so remember: measure noice lvl every time, so we dont have to guess !!! ( with stock cooler )
Report Comment
# Scythe Mugen for LGA775 core2 quadOmar 2010-12-13 19:32
Sorry if this is a silly question but you said three 8mm heatpipe rods in the base, or four 6mm rods are best for lga775, Mugen has 5 pipes, so does that mean it is even better for my processor? or does it need to be specifically either 3 or 4, again apologies if this is a silly question.
Thanks in advance.
Report Comment
# RE: Scythe Mugen for LGA775 core2 quadOlin Coles 2010-12-13 19:40
That's actually a very difficult question to answer, and depends on the heat output of the processor. If the processor receives extreme amounts of heat because of overclocking or increased voltage, it's better to have larger heat pipe rods. If the temperature envelope is moderate to low, the smaller rods are better.
Report Comment
# core 2 quad 2.4GhzOmar 2010-12-18 15:35
so bigger than mugen's? which are 6mm rods. I have not overclocked it yet, but that specific computer is for gaming, so i might later on overclock it. I cannot spend much, but i wouldn't buy crap either. Do you think mugen is a good choice?
Thank you very much for your reply and help. I REALLY appreciate it.
Report Comment
# Coolermaster hyper n620Pallab das 2011-03-16 04:15
Helo every one .I have AMD Phenom X4 965BE processor along with Coolermaster Hyper n620 & I get CPU temp : 34 to 45 Degree Celcius.
is it normal without overclocking.
My CPU fan in rpm is 1510rpm chasis 1 :700rpm,chasis 2 is : 637rpm.

please please please please advice me my e-mail id is : [email protected]
thanks 4 reading it
Report Comment
# RE: Coolermaster hyper n620David Ramsey 2011-03-16 07:22
Your CPU temperatures are fine.
Report Comment
# Coolermaster hyper n620KGA 2011-03-16 14:02
Your CPU temps are fine only in the sense that AMD Phenom CPU's are spec'd at 60.degrees or so for the 'high' limit.

However, I think your cooler should be getting lower temps. Your chassis fans look as to be set for 'quiet' performance but your CPU fan is 'cranking' on the fast side. I would think you would be getting below 30.degrees easily without any OC'n as you mentioned.

I'd try a new TIM, or completely clean and re-apply your Thermal(TIM) paste. I use Artic Silver or Tuniq. My Spire Thermax Eclipse II keeps my Thuban at 21.degrees when I had it at stock config.
Report Comment

Comments have been disabled by the administrator.

Search Benchmark Reviews

Like Benchmark Reviews on FacebookFollow Benchmark Reviews on Twitter