Archive Home arrow Reviews: arrow Network arrow Thecus N5550 NAS Network Storage Server
Thecus N5550 NAS Network Storage Server E-mail
Reviews - Featured Reviews: Network
Written by Bruce Normann   
Monday, 24 September 2012
Table of Contents: Page Index
Thecus N5550 NAS Network Storage Server
Closer Look: Thecus N5550
Insider Details: Thecus N5550
Technology Details: Thecus N5550
Thecus N5550 Features
Hardware Specifications
Software Specifications
NAS Setup and Usage
NAS Testing Methodology
Basic-Disk Test Results
RAID 5 Test Results
Intel NASPT Test Results
Non-Traditional NAS Results
NAS Server Final Thoughts
Thecus N5550 Conclusion

Thecus N5550 Software Specifications

The Thecus N5550 is designed for home use and small businesses. Nowadays, the typical home environment looks very similar to a small business anyways. When you have to combine the latest high tech devices, the legacy hardware and applications that everyone still has hanging around, the need to grant granular access to multiple terabytes of data with varying sensitivity, unified communications, and peripheral sharing - it's a daunting challenge. I also challenge you to tell me whether that last sentence refers to a small business or your own home network.

Because the Thecus NAS software is common across the product line, there are a great number of software features included with the N5550 that the typical user will never use, never see, and never even know they exist. You can be sure though, that every corporate sys/admin is looking through this list of software capabilities and checking off the required boxes for deploying a NAS in a secure large-scale business environment.

Software Specifications

RAID
RAID Modes RAID 0, 1, 5, 6, 10 and JBOD
Auto-rebuild Supported
Hot-swap Supported
Hot Spare Supported
Online RAID Migration Supported
Online RAID Expansion Supported
RAID Volume Encryption AES256bit
Disk
Power Management Available spin-down while idle setting
Bad Block Scanning Supported
SMART Info Supported
SMART Test Supported
Disk Roaming Supported
Network
Configuration Fixed IP address, dynamic IP address
Transport Protocols TCP/IP/AppleTalk
File Protocols SMB/CIFS, HTTP/HTTPS, FTP, NFS v4, AFP
Link Aggregation Load balance, Failover, 802.3ad, Balance-XOR, Balance-TLB, Balance-ALB
TCP/IP IPV4
Data Access
Client OS Support Windows 2000/XP/2003/Vista/ 7
UNIX/Linux
Mac OS X
FTP Built-in FTP server with bandwidth control
Secure FTP Built-in secure FTP server with bandwidth control
TFTP Users can download and upload files with TFTP programs
Download Manager BT download (via Transmission module)
HTTP/FTP/eMule (via DLM module)
NZB download (via NZB module)
Printer Server (IPP) Supports USB printers
Supports a wide range of IPP printers
Client can manage print tasks (list/delete) via web user interface
Data Backup
Client Incremental Data Backup Acronis True Image (OEM version)
Client System Disaster Recovery Acronis True Image (OEM version)
Client Side Backup Software Thecus Backup Utility (Windows/Mac OS X)
Rsync Backup Rsync replicates data between two systems (via Rsync module)
DVD Backup Supported
Mac OS X Time Machine Supported
Block Level Access
iSCSI Target/Initiator Supports Microsoft/Mac OS X/Linux initiators and Thecus NAS targets
iSCSI Thin Provisioning Supported
MPIO Supported
MCS Supported
Clustering Supported
SCSI3 Persistent Group Reservation Supported
Power Management
Scheduled Power On/Off Supported
Volume Management
Multiple RAID Supported
Multiple File System Selectable EXT3/EXT4/XFS
Multimedia Support
iTunes Server Supports AAC, MP3 w/ID3 tag and WAV
Piczza!TM Web Server (via module) Supports GIF, JPG (JPEG), BMP and PNG
Supports EXIF display
Supports slide shows
Media Server Supports uPnP AV streaming protocol (via Twonkymedia module)
User Authentication
Local User Supports built-in user accounts
Local Group Supports built-in user groups
Windows ADS Supported
File System
Type Journaling File System
Language Support Unicode Support
Authorization (ACL) "Read","Write", or "Deny" privileges to individual users or groups in folders
User Quota Supported
Administration
User Interface Web-based user interface supports English, Traditional Chinese, Simplified Chinese,
Japanese, Korean, French, German, Italian, Spanish, Russian, Polish and
Portuguese.
Utility Program MS Windows Setup Wizard Supports Windows 2000/XP/2003/Vista/7
Mac OS X Setup Wizard
Email Notifications Sends system messages via email to the system administrator
SNMP Trap System information trap out
Mobile Applications -(iOS/Android)
Thecus Dashboard Mobile monitoring and administration (via module)
ThecusShareTM Uploading, downloading, and streaming multimedia
Thecus-DiskTM Manage files and folders on Thecus NAS, playback audio and video media, and view photos and documents
Others
Recycle Bin Supported
Web Disk Supported (via module)
Web Server Supported (via module)
ISO Mount Supported
User/System Module Supported
IP Cam Surveillance Supports up to 5 IP cameras (via module)
Auto Module Installation Thecus's module server automatically provides the latest modules and updates through the user interface.
Cloud Backup Dropbox, ElephantDrive, Amazon S3, Acronis (via module)
Local Display X-Window via HDMI output
Antivirus McAfee (via module)

Besides the core features available in the Thecus firmware, additional capabilities are available in the form of add-in Modules. I counted twenty on the Thecus Website, and here's a summary list. In addition to the factory modules, there is a public element in play. Most of the third party modules are captured in the Thecus Forum.

  • Access Guard module
  • Dashboard Module
  • Dropbox module
  • ElephantDrive module
  • HiSSH module
  • IP CAM module
  • Local Display module
  • Mail server module
  • MySQL module
  • NZB module
  • Piczza! module
  • Raid Replication Module
  • Rsync backup module
  • T-OnTheGo and Transcoding service Module
  • Transmission (BT Client) Module
  • Twonky media server module
  • USB & eSATA schedule backup module
  • VirusScan module (McAfee Antivirus )
  • Web Server module
  • WebDisk module



 

Comments 

 
# RE: Thecus N5550 NAS Network Storage ServerMoogle Stiltzkin 2012-09-25 04:16
honestly... when will these NAS brands ever release a product which has ZFS in it. I am sick and tired of these crappy spec NAS, that can't offer the greatness that ZFS offers such as....

1. deduplication
2. end-to-end check sum error correction (CERN has stated officially, ZFS is the only reliable solution to protect data from bit rot)
3. and other ZFS features

also whats with 2gb minimum ram. they act as if ram is expensive, it's not. these days ram is sickeningly cheap because the companies producing them were not long ago fined for price fixing. Makes me wonder whether NAS companies are purposely price fixing to over charge for devices with little ram to squeeze as much more profit margin ....

People are starting to get fed up and moving onto DIY NAS solutions and which is cheaper, and has ZFS.
Report Comment
 
 
# We Just Did....Bruce 2012-12-07 11:03
We just reviewed that NAS I was talking about. Check out the EonNAS 1100 review on the front page.
Report Comment
 
 
# ZFSBruce 2012-09-25 09:02
I know at least one manufacturer who has brought ZFS into their mainstream product line, and I've reached out to them, to get a unit for review.
Report Comment
 
 
# SynologyFAbio 2012-09-25 09:44
You should review Synology NAS products, too. They are awesome!
Report Comment
 
 
# RE: SynologyOlin Coles 2012-09-25 09:47
We have reviewed several Synology products, but when one product did not receive an award they no longer offered samples to us for testing. Maybe that's why you think they're so awesome?
Report Comment
 
 
# RE: RE: SynologyFAbio 2012-09-25 10:01
They had problems with some products in the past. But recently I bought the model 1812+ and I am glad with his features and behavior. It has basicly the same features that thecus.
Report Comment
 
 
# RE: RE: RE: SynologyOlin Coles 2012-09-25 10:05
I was very disappointed when they decided to stop supporting us with reviews samples a few years back just because one product didn't receive an award. Hopefully they'll change their minds and want to show off their new hardware. QNAP is one particular brand I've seen good things from, and they continue to impress.
Report Comment
 
 
# N5550 Graphic and Memory MALFUNCTION - BE AWAREYaron 2012-09-27 23:46
One thing you should know before even considering this NAS.
#forum.thecus.com/viewtopic.php?f=65&t=4440
Report Comment
 
 
# Only affects memory "Upgrade"....Bruce 2012-09-30 21:04
The manufacturer did not, and does not offer an authorized upgrade of the memory from the standard 2GB. If you change the memory configuration on your own, it might work, and it might not. Don't worry, someone will figure out a way to make it work, and share it on the forum.
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage ServerYaron 2012-09-30 22:07
I own few Thecus units of different modules.
None of them ever had a problem after upgrading the memory.
This one DOES & for a very specific problem that Thecus CAN'T SOLVE & MIGHT NEVER BE SOLVED.
See the forum for more details...
FOR NOW JUST KEEP AWAY FROM THIS UNIT.
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage ServerCarlie Coats 2012-10-02 09:03
I'd like to see ATA-over-Ethernet (AoE), in addition
to SMB, NFS -- much better latency, better security
since it's a UDP (not IP) protocol (confined to the
local network).
Report Comment
 
 
# Thecus one day - Thecus no way!Souldream 2012-10-11 21:31
Forget about buying Thecus NAS.

They have the lowest level of support i have ever seen.

If you plan to buy NAS to put non important files = you can go.

If you plan to buy it for your company to store file, i will not let go ... as you could loose your job LoL

They do the same for 4100 model , low memory = unstable , web manager slow , and Raid destruction ( no hardware raid controller LoL ).

Look over my post in the official forum, and you will understand why Thecus is good on paper , in real use this is nightmare !

You are warned !
Report Comment
 
 
# RUN!!!Tracey 2012-11-08 08:32
As the above post states.. stay far away from this device. Unless you want an Enterprise device that can't copy files to and from without crashing or falsely reporting drive failures. I definitely regret this purchase!

You have been warned... again!
Report Comment
 
 
# 111MB/s is IMPOSSIBLEscavenger 2012-11-28 14:10
I'm using 5x2GB dreives in RAID5.
With ATTO i can have the same results as you have, BUT :
in real life, everybody is using samba shares under windows.

what about the only 55-65MB/s file transfers I get this way ?
Did you do this test ?
How can you show 111MB of read/write as it's impossible to achieve ?
I cannot get 111MB/s with any of the protocols available : smb, ftp, sftp, ssh, nfs, afp.
Please, tell me the truth about your tests ?
Report Comment
 
 
# Yes, it's possibleBruce 2012-11-28 18:22
I assume you just read the Conclusions page, where I stated:
"During timed transfers of 1GB and 10GB files the N5550 recorded Read speeds of 111 MB/s and Write speeds above 118 MB/s. These are the RAID 5 results..."

Go back and read the NAS Testing Methodology page, where I explain how each test is run. The timed file transfers are done in Windows Explorer, of all things. Imagine that...Windows is faster than some dedicated file transfer protocols!

If you can get 120+ MB/s using ATTO, just like I did, then you already know that your unit is capable of that level of performance. So, look at all the extra elements that might be holding transfer rates back in your application(s). Also look at the host computers doing your transfers. I'm using a 10GB RAMDisk to eliminate any potential slowdowns due to the impact of storage devices on my test bed system. Transfer rates from a laptop HDD are going to be MUCH slower, for instance.
Report Comment
 
 
# Oh really :-)scavenger 2012-11-29 14:54
Well I didn't understood you were transferring files on Windows Explorer with mounted SMB shares, exactly the same way I do my tests...
I got the same n5550 with 5x2TB HDD RAID5, and the same RAM disk drive, the difference is my Windows XP 64, and the fact I test with 802.3ad and 2xCAT5 cables on both sides.

I unfortunately am unable to reproduce your tests :
- which switch are you using ?
- which MTU is set on the PC ? on the NAS ? on the switch ?
- which strip size is set on your ext4 FS ?
- can you provide the result of "hdparm -tT /dev/md0" on the NAS ?
- did you "sync" the PC and the NAS after a transfer to eliminate the disk cache smoothing ? (I'm using a ported GNU version of sync.exe)
- did you monitor the RAM usage on the NAS during transfers ? I can get a 2GB peak during heavy load...

None of the time I did achieved a 110MB/s transfer with a single file, the max I get is 82MB/s with 2 files at a time from PC to NAS.
On normal conditions, I get 50-65MB/s max, mostly the same as on the n5500.
Thanks anyway for your time :-)
Report Comment
 
 
# Use Win7Bruce 2012-11-29 17:56
Well that explains it. You will never get the results I get if you continue to use Windows XP. In the "Testing Methodology" section, I reference the comparison I did two years ago between XP and Win7.

"...We are continuing our NAS testing with the exclusive use of Windows 7 as the testing platform for the host system. The performance differences between Win7 and XP are huge, as we documented in our QNAP TS-259 Pro review. The adoption rate for Win 7 has been very high, and Benchmark Reviews has been using Win 7 in all of our other testing for some time now. It was definitely time to make the jump for NAS products. ..." Here's the link:

benchmarkreviews.com/index.php?option=com_content&task=view&id=517&Itemid=70&limit=1&limitstart=10

Win7 beats XP by a mile in these scenarios, you should try it. None of the other factors you mention will make as big a difference as using Win7 on the PC side.
Report Comment
 
 
# LACP BenefitBruce 2012-11-29 19:55
BTW, what improvement in transfer speed are you seeing with IEEE 802.3ad (LACP)?
Report Comment
 
 
# LACP Benefitscavenger 2012-11-30 11:50
Absolutely none, now that I finally understood it's not a load balancing protocol but just a failover one.
But since I invested in a L2 switch + 2 x cables between PC NAS I'm not throwing them away :-)
For the real load balancing one, one have to select balance-SLB + round robin, but it's charging the network for nothing since the packets are not ordered and the final bandwidth is not what I expected :-(
Well with this network configuration, I can have at best 90MB/s but only with 3 file transfers at a time, which is not I wanted.
I want as you have, a 110MB/s bandwidth with a single file transfer.
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage Serveraceggroll 2013-02-13 18:06
The features I'd like to see are:
  • a USB 3 device (not host) connection (5GBit/Sec max), and
  • SATA III.


Surely this would be a cost effective way of increasing data transfer between computer and dedicated external storage. (And yes, I know this is not a NAS at this point, but I need a solution to replace a single external Harddrive for a laptop, and USB is a far simpler & cheaper setup than a network connection.)

Are there any vendors that are offering this in the SOHO market?
Report Comment
 
 
# USB, Yes. SATA III, No.Bruce 2013-02-13 18:34
Thecus has upgraded the front USB port to 3.0 specs on the N5550, and many other products. But it's not a "Device" connection, like you are looking for. Does your laptop have an eSATA port? There are several "boxes" available that have 1-4 drive bays and will run pretty well off eSATA, in Port Multiplier mode.

SATA III has a very minor impact on HDD performance, in my experience. It's only when you get to the third generation of SSDs, that SATA III was really needed.
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage Serveraceggroll 2013-02-13 21:22
Bruce, thanks for tip.

Laptop does have eSATA (1 x eSATA/USB 2.0 combo), but manufacturer doesn't give away how fast the eSATA is going to run :-(

I'm not sure if I'm interpreting the N5550 spec correctly, but the eSATA spec seems to be imply that I would use if for adding an external disk to the device. I want to be able to use the NAS as eSATA storage for a computer/laptop.

If anyone has tried this with other NAS devices, I'd be very interested to know how transfer rates compare between eSATA and GB LAN (as the LAN connection should no longer be the bottleneck.)

Also, if vendors are monitoring this thread... Would be great if you are not then could publish your noise spec. Pretty important if the device isn't sitting in a rack, and next to or on somebody's desk.
Report Comment
 
 
# Not a NAS, per se.....Bruce 2013-02-14 10:01
Yes, all the other interfaces, besides Ethernet, are going to be host connections. It's very rare that any NAS unit would have the capability of multiple "device" interfaces. One that DOES, is the IOCELL NetDISK 351UNE Network Storage Device, which I reviewed here: benchmarkreviews.com/index.php?option=com_content&task=view&id=849&Itemid=70
It only supports one drive, though.

The drive enclosures that have just USB 3.0 and eSATA interfaces tend to be a whole lot cheaper than a full-blown NAS solution. There are dozens of them at Newegg, like this one:
newegg.com/Product/Product.aspx?Item=9SIA1DS0CD0624

eSATA itself is a pretty quick interface.
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage ServerYaron 2013-02-13 22:15
Bruce,
The N5550 can't be a USB target - it can be used only as USB host.
Thecus has the N5200 family which is a bit "older" and I remember one of it's products can do it.
Take a look at their site.
Yaron.
Report Comment
 
 
# Product EvolutionBruce 2013-02-14 10:25
Yes, the N5200 had it: USB ports 2 x USB A type (Host mode); 1 x USB B type (Client mode) .

As others have mentioned, Thecus did a major architecture update on their product line a few years ago. I can't find any instances of Client mode USB in their current offerings.
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage ServerYaron 2013-02-14 20:24
Right - it doesn't exist anymore.
Report Comment
 
 
# 8 gig ram installed on N5550Bruce MacDonald 2013-03-26 22:36
I just bought this unit last week and have it running on 8 gig of ram I took out of a 2011 MacBook Pro. I edited the menu.lst file via SSH to remove the 4 Gig Ram limitation soft coded. Surprising because Intel lists this processor as only supporting 4 Gig too.

To edit the menu.lst file to remove the MEM=4G parameter

Via telnet/ssh (or console) :

# mount /dev/sdaaa1 /boot
# vi /boot/boot/grub/menu.lst
Report Comment
 
 
# RE: Thecus N5550 NAS Network Storage ServerYaron 2013-09-03 13:25
Bruce,
R U using 1x8g or 2x4g ?
Report Comment
 

Comments have been disabled by the administrator.

Search Benchmark Reviews
QNAP Network Storage Servers

Follow Benchmark Reviews on FacebookReceive Tweets from Benchmark Reviews on Twitter