|OCZ RevoDrive Hybrid PCI-E SSD RVDHY-FH-1T|
|Reviews - Featured Reviews: Storage|
|Written by Olin Coles|
|Monday, 24 October 2011|
Page 6 of 9
CrystalDiskMark 3.0 Tests
CrystalDiskMark 3.0 is a file transfer and operational bandwidth benchmark tool from Crystal Dew World that offers performance transfer speed results using sequential, 512KB random, and 4KB random samples. For our test results chart below, the 4KB 32-Queue Depth read and write performance was measured using a 1000MB space. CrystalDiskMark requires that an active partition be set on the drive being tested, and all drives are formatted with NTFS on the Intel P67 chipset configured to use AHCI-mode. Benchmark Reviews uses CrystalDiskMark to illustrate operational IOPS performance with multiple threads. In addition to our other tests, this benchmark allows us to determine operational bandwidth under heavy load.
After several initial cache runs, each subsequent test with the OCZ RevoDrive Hybrid PCI-E Solid State Drive were consistent with the best results obtained used in the chart below. Because this benchmark uses compressed data, sequential file transfer (write) speeds are reported lower than with other tools using uncompressed data. CrystalDiskMark 3.0 reports sequential speeds at 331.8 MB/s read and 105.8 MB/s write. 512K results reached 325.1 MB/s read and 107.9 MB/s write performance.
For this section, we will concentrate on the operational IOPS performance using compressed data. 4K tests produced 26.16 read and 73.45 write performance. Displayed in the chart below, the maximum 4KB queue depth 32 IOPS performance results for several enthusiast-level storage products illustrate which products offer the best operation under load:
In the next section, we continue our testing using Iometer to measure input/output performance...