Archive Home arrow Reviews: arrow Cases arrow Lancool First Knight PC-K63 Computer Case
Lancool First Knight PC-K63 Computer Case E-mail
Reviews - Featured Reviews: Cases
Written by Steven Iglesias-Hearst   
Sunday, 23 January 2011
Table of Contents: Page Index
Lancool First Knight PC-K63 Computer Case
Closer Look: PC-K63 Exterior
Detailed Exterior Features
Closer Look: PC-K63 Interior
Detailed Interior Features
System Build and Testing
Lancool PC-K63 Testing and Results
Final Thoughts and Conclusion

Closer Look: PC-K63 Exterior

In this section we will have a look at the exterior styling and features of the Lancool PC-K63 PC case.

Lancool_PC-K63_Computer_Case_Box.jpg

The PC-K63 ships in a lovely looking box full of color and information and all of the important features are pictured. The box held up quite well considering it travelled from Taiwan to the UK.

Lancool_PC-K63_Computer_Case_Front.jpg

The front of the PC-K63 case is very different to anything Lancool have done before, it is very unique and functional but not the best looking face. One major factor that spoils the front looks for me is that the 5.25" drive bays are recessed, if they were flush then I am sure that the looks would be more appealing. I also like the front of cases to be more uniform, the PC-K63 uses a mixture of styles.

Lancool_PC-K63_Computer_Case_Windowed_Side.jpg

When we look at the left side of the PC-K63 case we have a lovely big clear window. It is nice to see a side window without vents for once which means you can show off your hardware without obstruction. The shape of the window follows the shape of the case, this would have been better as a square.

Lancool_PC-K63_Computer_Case_Back.jpg

Moving round to the back we see that the PC-K63 has a bottom mounted PSU, vented PCI backplates and rubber grommets to allow watercooling pipes or wires to pass through.

Lancool_PC-K63_Computer_Case_Right_Side.jpg

The right side of the case is very plain, this panel is interchangeable with the left side window panel and will give you the option of hiding your components away if you don't fancy showing them off.

Lancool_PC-K63_Computer_Case_Top.jpg

The top of the PC-K63 case is possibly the nicest part, the lines look sleek and the vents look like a sharks gills. Speaking of the vents there is plenty of room for air to move through these which is very important when you want to get that hot air out.

Lancool_PC-K63_Computer_Case_Bottom.jpg

At the bottom of the PC-K63 case we see four rubber feet, not overly big but suitable for the task all the same. We also see that the vent for the PSU has a removable dust filter. Like many of their other high-end cases, the Lancool PC-K63 includes holes at the bottom of the case for cabling accessories from Lian Li.



 

Comments 

 
# RE: Lancool First Knight PC-K63 Computer CaseRobert17 2011-01-24 03:21
Good review. Comparing/contrasting with Nate Swetland's review of the Zalman Z9 of Jan.20th, the feature-rich set of these middies really stands out. The battle to win the enthusiasts is reaching a remarkably high level. And in short time. It seems that only in the past five years have cases improved rapidly and dramatically. Beige reigned supreme for far too long.

I studied many reviews and did some tinkering with my top picks over the last 6-8 months, finally settling on an NZXT Phantom black; picked it up locally for $99 on sale. It appears that all the case manufacturers are up to the task of providing excellent "bang for the buck". The future of cases looks bright indeed.
Report Comment
 
 
# Functionrealneil 2011-01-24 07:12
This case isn't so beautiful as you say, but it does have a nice set of features (as you say) inside of it and I can see where it would be a pleasure to build with. The true downside to this case is the price. There are just too many other cases out there that provide excellent cooling, while looking better, and cost far less than this does. The easy to work with interior features don't warrant such a cost.
Report Comment
 
 
# Inside win, outside lose.Enigma 2011-01-24 09:37
The wire channel... Genius. The removable drive bays.. Nice. The inner quality. Great.

Outside. The pompadore look went out in the 1950s.. Well. How can I describe this.. Have you ever seen a baby that was so ugly that you couldn't look at it for more that a second at a time and you felt like telling the mother the truth but the mother is LIAN LI. The whole front is loser..All the way. I do like the controls and the indented usb panel that is nice but not enough..One E Sata.. One USB3 and one USB2.. are those things that expensive to manufacture. You should have concidered a CoolerMaster style drive bay inside that front Cancerous bump to fill the void you put in the front of that case.

You know if I had an aging Lancool that was scratched and broken on the inside I might consider buying this and putting my old top and front on it.

I will be really surprised if they sell many of these.. remember the Menatour.
Report Comment
 
 
# RE: Lancool First Knight PC-K63 Computer CaseNate Swetland 2011-01-24 09:43
I really like that cable management channel, a lot. I couldn't quite tell, are all the fans 3pin power with a molex adapter, or do some have only molex? Do the PCI or 5.25" covers snap off? If so, can you re-attach them? That is one of my biggest gripes with cases anymore, snap-off parts. I also don't like the I/O panel to be on the top, I prefer the front.

It's too bad this case is not very pleasing on the eyes, because it looks like it has a couple of great features like the removable HDD cage and wire management.

Nice review!
Report Comment
 
 
# RE: RE: Lancool First Knight PC-K63 Computer CaseSteven Iglesias-Hearst 2011-01-24 12:10
All of the fans are 3 pin and have a molex power adapter, a little bit of an oversight from my end, sorry. The PCI and 5.25" covers do not snap off, I would have definitely made a point of that if they did because I hate them too.

Thanks Nate and everyone else for the postive comments.
Report Comment
 
 
# Really nice reviewEd Hume 2011-01-24 19:39
I love how you explore this case with the water coolers in mind.

I also love how you reported the distances, including the distance behind the mb tray. Thanks for that.

I think that Lian Li have built a thoughtful case. Two 140mm fans up front is a great idea, especially if you ditch the junk that Lian Li usually put in their cases and replace them with blue LED Yate Loon D14SL-124B's.

Another fine feature is the pair of 140mm fan positions at the top with no grills. My preferred arrangement is to block off the rear position and use the forward top position as an intake, to feed fresh air to the heatsink. People who have tried this get 3 - 5c better cpu temps than using the top fans as exhaust.

Thanks again for the fine review. It's an excellent introduction to what looks to be a fine case.
Report Comment
 
 
# Great reviewfinnr 2011-01-29 21:23
I actually like this case. I have a Lian Li PC-A03 and I would upgrade to the K63 any time. It looks very spacious and great airflow.
I like the simple design of Lian Li and the aluminium look, and I never really liked the usual gamer cases (Antec, Cooler Master etc.). The curves on the K63 look great. I am bored with square cases :)
Report Comment
 
 
# come on guys...Enigma 2011-01-29 22:40
Are you getting paid to say that this is a nice looking case.. It's a Lian Li. A pedigree. It's not proper for a Lian Li Mate with a Raid Max or any other Riff raff. It is an ugly Case. It is not a design element that I would continue unless you like eating your inventory.
Report Comment
 
 
# RE: come on guys...Steven Iglesias-Hearst 2011-01-30 04:57
It also wasn't right for Lian Li to mate a PC case with a snail but they did it anyway.... search google images for "Lian Li PC777" and you will see what I mean.
Report Comment
 
 
# Steven..Enigma 2011-01-30 18:21
I know which one you are talking about ... at least that is a Classic design.. The next one will look like a 57 Chevy with pushbutton automatic I guess.. Get it Right Lian Li.. KISS.. Keep It Simple Stupid.
Report Comment
 
 
# K-63 Vs Nzxt PhantomViv 2011-02-19 03:34
Was looking at getting Phantom, based on positive reviews (here & elsewhere). I originally looked at K-62 but then realised it could only take 4 HDD's.
Question to original reviewer: Taking aesthetics and appearance out of the equation, which one is better?
Report Comment
 
 
# RE: K-63 Vs Nzxt PhantomSteven Iglesias-Hearst 2011-02-19 04:16
It's really difficult to answer that question because I haven't had my hands on a Phantom but I can say the Phantom looks like it is really functional and has lots of room to play with. Unfortunatel you will have to make that choice for youreslf.
Report Comment
 
 
# About Watercooling @ Lancool PC-k63WanKu Goranov 2011-03-21 07:52
Hi ,
very very interesting review .. full with information & details .. excellent work !!!
My question is .. how thick 280mm radioator can be installed at the top ?! There is very little information @ web about this case (Lancool site is also very very poor on information)
If there is no room for appropriate radiator @ top .. i think the only other way , is modifying the bottom , but dust-filters+thick radiator+2pull 140mm fans .. i think .. the CFM will decrease a lot.. and the radiator can not be chilled appropriately .
Report Comment
 
 
# RE: About Watercooling @ Lancool PC-k63Steven Iglesias-Hearst 2011-03-21 13:11
If I were to install a rad in this case it would be on top (under the plastic shroud) as there is only 25mm gap above the mobo on the inside, there is a nice 40mm gap under the top plastic shroud. Hope this helps.
Report Comment
 
 
# thnxWanKu Goranov 2011-03-26 15:06
thnx mate :) very usefull info :)
So í'm busy in the summer , eventuelly my build will start Oct-Nov , so if nothing new is commin' out , i guess my choice will be Haf-X .. hopefully the price will be a lil bit lower.. now it's about 160 Euro in my country Bulgaria :)
After your review , i was inlove with this Knight-Case , but 40mm radiator doesnt suits me , i would use smthg lika XSPC or Phobye thicker radiotors (about 60mm) .. So thnx again !! This info was very usefull , because there is nothing so concrete as numbers about this case currently online . You first revelead the truth :))
Report Comment
 
 
# Found My CaseOli DIYer 2011-04-11 00:53
Good evaluation, Steven. I just ordered one after dropped an order on Antec 902 V3. K63 looks just like my old Nokia 8850 cell phone. So the front pancel is acceptable to me. The shape of the side window is worse. Lian Li should allow owner to swap the top/front panels to the K62.

I've been looking for cases with features:
- Multiple quiet big fans (at least 4), with easily detachable filters.
- Top fan(s) must not block the big CPU-cooler. Outside-mount is better and safe. I've heard someone's top fan broke and fell down and could hit the CPU.
- USB3.0 & Esata at front.
- Side window so I can measure different area temperatures from outside.
- Good wire management, or side window will make my PC look even uglier.
- Black inside out, or side window is not needed.
- 2.5" SSD mount (at least 2).
- Can fit an 11.5" long graphic card.
Around the same price, can anyone suggest other similar cases like this?
Report Comment
 
 
# Closer LookOli DIYer 2011-04-18 20:16
I've read your review again, word by word, after I assembled my K63.
- Great observation on mounting six 2.5" HDD, with two unside down. If you haven't said so, no one would ever know.
- In your testing, the CPU hot air flows from front to back, then taken out by the 12" rear case fan, because the two CPU fans are oriented horizontally. I wonder that If you orient the CPU fans vertically upward, would the two 14" top case fans do a better job in taking out the heat.
- The clip-hinge for easy cards installation is a good idea, but not practical. First, most of the hinges can not hang on at top after fully lifted up. They simply drop back down by gravity. I had to use Scotch tape to hold them in order to free both my hands. Secondly, the device is bulky and the open gap after a full lift is only 18mm high. I had a hard time to squeeze in my 3-slot wide, 11" long graphics card. I can either take the top 3.5" rack out, or better yet, take the whole clip-hinge device off, for an easier insertion. Either way, the purpose of the hinge device is invalidated.
Still, it is a well-designed high quality case.
Report Comment
 
 
# RE: Lancool First Knight PC-K63 Computer CaseSteven Iglesias-Hearst 2011-04-19 13:19
Thank you, Oli. I'm glad my review helped you.

The Zalman CPU cooler it a heatpipe tower cooler, so in this orientation it is in its best theoretical position as the fluid in the hat pipe needs somewhere to rise to. Many of Olin's CPU comparison articles on this website have pointed this out. The best thing you could do is a little bit of experimentation of you own, it's all part of the experience. :)

As for your observations with the expansion slot hinges, I feel what you are saying but I myself didn't find it to be a problem. What sort of a monster video card do you have that uses 3 slots? Sounds like a beast lol.
Report Comment
 
 
# RE: Lancool First Knight PC-K63 Computer CaseOli DIYer 2011-04-26 00:35
I have two monsters in my case, the first one is Noctua NH-D14, with 2 fans like the Zalman's. Fluid flow in the heat pipe is another new knowledge I learned from you. I did ask Noctua tech support about the fans orientation. The response is pretty much like yours. Currently I let them sit vertically, so the lower fan can help suck out some heat from the backplane of the VGA card, and let the two case fans do the rest job. Without applying thermal paste, and running Crysis 2 at stock speed, the i7-2600k is kept under 67C.

The second monster is the Asus GTX570 DCII, which occupies 3 slots of the Sabertooth P67 mobo, and wastes me 2 PCI expansion slots. The trade-off is that I get a very quiet and cool card for overclocking.
Report Comment
 
 
# RE: Lancool First Knight PC-K63 Computer CaseJason 2011-12-05 22:57
I really don't think this case is ugly. Actually I like the curvy shape but it does look a tad top heavy but so what. I actually like the idea of placing the LEDs on top so it glows on the MB because if any part is ugly it would be the LEDs showing throught the front of the case.
Report Comment
 

Comments have been disabled by the administrator.

Search Benchmark Reviews
QNAP Network Storage Servers

Follow Benchmark Reviews on FacebookReceive Tweets from Benchmark Reviews on Twitter