Archive Home arrow Reviews: arrow Motherboards arrow Intel DH67BL H67-Express Motherboard
Intel DH67BL H67-Express Motherboard E-mail
Reviews - Featured Reviews: Motherboards
Written by Hank Tolman   
Sunday, 02 January 2011
Table of Contents: Page Index
Intel DH67BL H67-Express Motherboard
Intel DH67BL Features and Specifications
Closer Look: Intel DH67BL Motherboard
Intel DH67BL Detailed Features
Motherboard Testing Methodology
AIDA64 Extreme Edition v1.1 Benchmark Tests
Passmark PerformanceTest
3DMark Vantage Benchmark Tests
PCMark Vantage Benchmark Tests
SiSoftware Sandra
Cinebench R11.5 Benchmarks
Far Cry 2 Benchmark Results
Resident Evil 5 Benchmark Results
Street Fighter IV Benchmark
Video Transcoding Tests
Overclocking and Power Consumption
H67-Express Final Thoughts
Intel DH67BL Conclusion

Intel DH67BL Features

  • Supports the 2nd-generation Intel Core processors, including the Intel Core i7 and Intel Core i5 processors, and other Intel processors in the LGA1155 package for exceptional performance
  • Intel H67 Express Chipset PCH
  • Intel Rapid Storage Technology for RAID 0, 1, 5, and 10
  • Dual-Channel DDR3 with four connectors for 1333/1066 MHz memory support (32 GB max):
    • Supports 1.2V to 1.8V memory voltage control for maximum DIMM compatibility
  • PCI Express 2.0 x16 graphics connector
  • Two PCI Express x1 connectors and one PCI connector
  • Two SATA 6Gb/s ports and three SATA 3Gb/s ports, with one port compatible with an eSATA extension
  • One eSATA 3Gb/s port
  • Two SuperSpeed USB 3.0 ports:
    • 5.0 Gb/s signaling rate for high-speed connections to peripherals
  • Fourteen Hi-Speed USB 2.0 ports:
    • Six back panel ports and eight additional ports via four internal headers
  • Integrated Intel PRO 10/100/1000 Network Connection for high speed and low power consumption
  • Ten-channel Intel High Definition Audio with multi-streaming capability
    • Features five stack analog audio ports, one optical S/PDIF out port, internal S/PDIF header, and front panel audio header
  • DVI-I + HDMI:
    • Supports dual independent display and allows for the most flexible display output for Intel processors with Intel HD Graphics
  • MicroATX Form Factor

Intel DH67BL Specifications

Processor Support

Intel Core i7, Intel Core i5, Intel Core i3, and

Intel Pentium processors in an LGA1155 socket:

  • Integrated graphics processing (processors with Intel HD

Graphics 2000 or 3000)

  • External graphics interface controller
  • Integrated memory controller

Chipset

Intel H67 Express Chipset consisting of the Intel H67 Express Platform Controller Hub (PCH)

Memory

Four 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets

  • Dual Channel DDR3 1333 MHz and DDR3 1066 MHz support
  • Support for 1 Gb, 2 Gb, and 4 Gb memory technology
  • Support for up to 32 GB of system memory with four DIMMs using 4 Gb memory technology
  • Support for non-ECC memory
  • Support for 1.35 V low voltage JEDEC memory

Graphics

Integrated graphics support for processors with Intel HD 2000 or 3000 Graphics:

  • High-Definition Multi-media Interface (HDMI) 1.4
  • DVI-I
  • Discrete graphics support for a PCI Express 2.0 x16 add-in graphics card

Audio

10-channel (7.1+2) Intel High Definition Audio (Intel HD Audio) using a Realtek ALC892 audio codec including:

  • Front panel audio header with support for Intel HD Audio and AC '97 Audio
  • Five analog audio jacks on the back panel
  • Onboard S/PDIF out header and back panel S/PDIF out connector
  • 8-channel (7.1) Intel HD Audio via the HDMI interface

Expansion Capabilities

  • One PCI Express 2.0 x16 add-in card connector
  • Two PCI Express 2.0 x1 add-in card connectors
  • One PCI bus add-in card connector

Peripheral Interfaces

USB Support:

  • Two USB 3.0 ports implemented with stacked back panel connectors
  • Fourteen USB 2.0 ports:
  • - Six ports implemented with stacked back panel connectors
  • - Eight front panel ports implemented with four dual-port internal headers

Serial ATA Support:

  • Two Serial ATA (SATA) 6.0 Gb/s ports
  • Two Serial ATA (SATA) 3.0 Gb/s ports
  • Two external SATA (eSATA) 3.0 Gb/s ports (one on the board and one on the back panel)

Legacy I/O Support

Legacy I/O Controller (Nuvoton W83677HG-I) that provides Consumer Infrared (CIR) support

LAN Support

Intel 82579V Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs

BIOS

Intel BIOS resident in an SPI Flash device

  • Support for Advanced Configuration and Power Interface (ACPI),

Plug and Play, and SMBIOS

  • BIOS support for Hyper Boot
  • UEFI to support hard disk drives larger than 2 TB

Instantly Available PC Technology

  • Support for PCI Local Bus Specification Revision 2.3
  • Support for PCI Express Base Specification Revision 2.0
  • Suspend to RAM support
  • Wake on PCI Express, LAN, front panel, CIR, and USB ports

Hardware Management

Nuvoton W83677HG-I based subsystem, including:

  • Voltage sense to detect out of range power supply voltages
  • Thermal sense to detect out of range thermal values
  • Three fan headers using PWM control
  • 4-pin headers for processor and chassis fans
  • 4-wire and 3-wire (linear) fan speed control support for the chassis fans
• Support for Platform Environmental Control Interface (PECI)

Board Size

9.6" x 9.6" (24.38cm x 24.38cm) (MicroATX)

Operating Tempertature

0 to 55 degrees Celcius

Storage Temperature

-20 to +70 degrees Celcius



 

Comments 

 
# Dr.Error Correction Code 2011-01-04 07:51
Four slots, each can adress a module of maximum capacity of 4GB and you count that as 32GB of RAM? 4x4=16 as far as my math goes.
Report Comment
 
 
# You are rightHank 2011-01-04 17:26
"Support for up to 32 GB of system memory with four DIMMs using 4 Gb memory technology"

That came straight from the specifications Intel gave us. Quite interesting. Thanks for the spot.
Report Comment
 
 
# RE: You are rightOlin Coles 2011-01-04 17:32
I doubt that you have four 4GB modules hanging around doing nothing, but I'm betting that this motherboard supports 32GB like the other 67-series products.
Report Comment
 
 
# RE: RE: You are rightHank 2011-01-05 07:41
True, true. Although I would need 4 x 8GB modules to see if it supports 32GB.
Report Comment
 
 
# b vs. BNathan 2011-01-06 10:23
In this context, b = bits and B = bytes. "4 Gb memory technology" in the specs refers to the maximum supported size of DRAM chips on the DIMMs, 4 gigabits in this case. The number and size of DRAM chips on a DIMM determines its total size. An 8 gigabyte DIMM could be made up of 1Gb, 2Gb, or 4Gb DRAMs depending on the data width of the DRAMs (4 bits or 8 bits) and the number of "ranks" on the DIMM. I don't think 4Gb DRAMs are very common yet, but this board will support them if you buy DIMMs that use them.
Report Comment
 
 
# great reviewNathan 2011-01-06 10:38
BTW, thanks for the detailed review!

Only one discrepancy that I noted: the "Handbrake Video Transcode Test" graphic has the note "Higher is Better" in the sidebar but it should be "Lower is Better" for this one.
Report Comment
 
 
# RE: b vs. BHank 2011-01-07 13:34
Good call, I didn't even make the connection at first when I read 32GB of memory using 4Gb technology. Thanks for the explanation.
Report Comment
 
 
# Underclocking?gevo 2011-01-07 18:55
Can you reduce the multiplier (i.e. underclock) of a CPU on BDH67BL H67 motherboard? If yes, then does it work with all Sandy Bridge CPUs or only the -K variants?

Thanks!
Report Comment
 
 
# No underclockingHank 2011-01-15 06:24
No, you can't change the clock speed of the CPU at all using this motherboard.
Report Comment
 
 
# Power consumptionSte 2011-01-08 20:10
I'm planning on building a low power HTPC around this board and an i5-2500T. I was amazed that with even with a 2500K it draws only 115 Watts fully loaded.

So the question becomes: what would be the perfect power supply for my low-power HTPC system, taking into consideration I'll have no PCIE video card, a PCI TV tuner, a blu-ray drive and a single 2 Tb SATA drive?
Report Comment
 
 
# 300WHank 2011-01-15 06:26
I would recommend a 300W PSU, although if you can find a 200 / 250W with at least 80+ bronze certification, it should work fine.
Report Comment
 
 
# which processor betterjack 2011-01-09 07:58
which processor is best for this motherboard? i plan to get i5 2400. bcos author didnt recommend for k series. now my choice either 2400 or 2100.
Report Comment
 
 
# I haven't tested the 2400 or 2100Hank 2011-01-15 06:27
Since I've only tested the 2500K, I don't know how well the 2400 or 2100 would compare in performance for the price.
Report Comment
 
 
# about those capacitorjack 2011-01-09 08:04
i dont understand why until now intel still not using all solid state capacitor, but will those normal capacitor lasting?
Report Comment
 
 
# MemoryKevin 2011-01-18 02:55
Stupid question, but can you use ddr3-1600 memory?
Report Comment
 
 
# RE: MemoryOlin Coles 2011-01-18 08:53
This motherboard will support up to 1333 MHz DDR3 memory with no additional settings needed, or 1600+ by changing settings in the BIOS to 'overclock' the memory. No Intel motherboard exists yet that supports 1600 MHz or faster RAM without overclocking.
Report Comment
 
 
# GPU Freq. monitoringServando Silva 2011-01-20 12:49
Hi Hank. I'm just trying an ASUS H67 motherboard and there's a real simple way to monitor iGPU frequencies. Just use CPU-Z 1.56.2 and check the GPU tab. Since I'm using a Core i7 2600K my idle freq. is 850MHz while it goes up to 1350MHz when I put some load. I managed to OC it to 1650MHz and received a nice 22% OC.

As for tests, I checked it with SF IV Benchmark and the turbo went to 1650MHz all the time giving a 14% extra performance. You might want to give it a new shot.

Take care.
Report Comment
 
 
# K-Series is no waste on H67!Beck Christian 2011-01-23 05:22
Since they have faster integrated graphics than their non-k counterparts.
If one wants to build a HTPC, the K-Model is better.
Report Comment
 
 
# RE: K-Series is no waste on H67!Beck Christian 2011-01-23 06:43
by the way, the core i-5 2500k is the smallest sandy bridge cpu with the hd3000 graphics.
all other 2500s have the hd2000 only. same for all the i3s.

for the few bucks more the 2500k costs, you dont need to buy a discrete
graphics card in several cases.
Report Comment
 
 
# RE: Intel DH67BL H67-Express MotherboardJohn D 2011-01-31 15:26
Question? DG965RY Intel mobo, 450W PS, wanting to upgrade processor for w-7, to Quad-core, and jack the Ram to 12Gb. Gaming being the driving force. Was told that the mobo will only do 95 watt processor, and that Quads require 105W. Is that a power load, or is it generated heat? Cant afford to make a costly mistake, and it may be better to gt MOBO/CPU bundle. What say Ye?
p.s.: You sure that mbo can deliver HD graphics? 1080 or 720? If no video card needed, theen it would save 200USD
Report Comment
 
 
# RE: RE: Intel DH67BL H67-Express MotherboardOlin Coles 2011-01-31 16:17
You'll need a 64-bit version of Windows 7 to get more than 4GB of RAM usable, and quite frankly 4GB is more than any game will ever use in the next year or so.

The DG965RY uses a socket LGA775 processor, and should fit any/all other same-socket CPUs. This new motherboard fits LGA1155 CPUs, and yes, it will display HD graphics at 1080/720p.
Report Comment
 
 
# RE: Intel DH67BL H67-Express MotherboardJohn D 2011-01-31 20:00
Thanks for the reply, Perhaps, I was not clear on my inquiry. Is there any quad-core 775 socket processor that will run at 95W or less, as this appears to be the stated limit of DG965RY. I was told all QUAD core CPU run at 105W.
I am aware of the info you sent re:64bits OS, but am thinking the added RAM should allow for better performance. Took out the Creative cound card and got some boost in performance, and it cleared up the crashing, while giving me better snd quality on the in-board chip, but the video chips will not drive/show Everquest on my Samsung 120hrz monitor.
Thanks for the reply
Report Comment
 
 
# RE: RE: Intel DH67BL H67-Express MotherboardOlin Coles 2011-01-31 20:23
Your power supply and motherboard should be fine, regardless of CPU power rating. The difference isn't enough to warrant a new PSU, and there's probably a BIOS update for your motherboard to ensure smooth stability.

If you're expecting better game performance by adding memory, you might want to do more research. Too much memory is actually a bad thing, since data must strobe through the entire series before reporting to the processor. So if your system only ever utilizes 2-3GB of RAM, then 4GB is fine. 12GB would just be a waste of money, and come with a latency penalty.
Report Comment
 
 
# DH67BL Integrated GraphicsJeremy 2011-02-19 06:54
Hi,

I recently purchased this MB, I know it was recalled, will get the new version after the OEM receives the new MB. However, at first I was having trouble starting the system up, so I booted it via safe mode. Disabling the integrated graphics card solved it and I can use my computer completely just as long as I don't enable the Graphics driver. Does anyone know what my problem could be?? Also is it possible for me to make changes to the display settings of said device without having it enabled? Thanks in advance for anyone who might be able to help out.
My system specs:

Intel Core i5-2500 3.3Ghz
Intel DH67BL Motherboard
Windows 7 Home Premium 64-bit
500GB WD Caviar Blue HDD
Logysis 550W PSU (475W Truepower)
2 Antec Blue LED case fans
Cooler Master Elite 310 Case
Hooked up via HDMI to a 42" Philips LCD
Report Comment
 
 
# MrPhizoR 2011-04-04 06:26
I have the same problem. I have an I7-2600 on the new BEARUP LAKE motherboard,(the new release, not the recall)

The PC works fine until you install the graphics driver. As soon as you install the graphics driver the PC will restart everytime you boot into windows?
Report Comment
 
 
# RE: MrOlin Coles 2011-04-04 07:42
It definitely sounds software/driver related. I suggest that you uninstall all video drivers, restart, and install again using the manual driver install method.
Report Comment
 
 
# RE: MrJeremy 2011-04-04 11:54
Yes this problem seems to be popping up more frequently. I tried upgrading my PSU like they told me over at Intel's slow paced chat support line.. to no avail. I tried what Olin Coles said, about 5 or more times, always get the same error (or blue screen) once the graphics driver is installed. Eventually I got fed up of it all, and got a cheap graphics card (Radeon HD 4850 for $80 @ amazon.) It's ok for gaming, but I'm literally using it instead of the integrated video as I game on console, not PC. Also for the RMA I just went with a Gigabyte P67, I kind of lost my faith in this motherboard due to lack of support/solutions.
Report Comment
 
 
# Technical ManagerCharles 2011-04-06 13:20
I have had a system built for me in Dubai. Motherboard is DH67BL, 16GB RAM, 2x2TB HDD, 2GB ATI Radeon graphics card, GIGABYTE ODIN power supply. Problem is when system is switched on for about 2 hours and needed to re-start it will say " invalid partition or boot failure". But when left alone for about an hour, it works again. Is my HDD too big for the board or what is wrong? My processor is i7-2600.
Report Comment
 
 
# RE: Technical ManagerJeremy 2011-04-06 13:52
Charles,

Have you enabled UEFI boot in your BIOS? Most systems require this be enabled in order for you to be able to boot with a 2TB or higher HDD.

Let me know if his helps
Report Comment
 
 
# Technical ManagerCharles 2011-04-06 16:51
Thank you very much Jeremy. When the UEFI was enabled, the system boots without a hitch. Problem is solved. Thanks.
Charles Ofosuhene, Accra-Ghana
Report Comment
 
 
# RE: Technical ManagerJeremy 2011-04-06 18:32
You're welcome, I'm very glad to hear that your problem was solved, if anything else causes a problem please let me know.
Report Comment
 
 
# RE: Intel DH67BL H67-Express MotherboardBret 2011-04-15 14:56
I am trying to find out if either the I-3 2100 or I-5 2500k would make a better back end linux media sever (Mythbox) for low power usage. It will have 2 tv cards SSHD
2TBb hard drives and will be running 24/7. I want to use the onboard graphics to do HD streaming to the front ends throughout the house.
Report Comment
 
 
# RE: RE: Intel DH67BL H67-Express MotherboardOlin Coles 2011-04-15 14:59
It sounds like the Core i5-2500K would be a better fit based on these needs.
Report Comment
 
 
# 3D Blu Ray VideoPierre 2011-07-26 04:31
I have a Blu Ray DVD player and I want to play 3D Blu Ray disk. Do I need a video card or can this motherboard drive a 3D Ready monitor supplied with glasses.
Report Comment
 
 
# RE: 3D Blu Ray VideoDavid Ramsey 2011-07-26 07:03
You'll need a separate video card for 3D.
Report Comment
 
 
# Resolution ProblemMindu 2011-07-26 23:13
Perfectly worked my LED monitor (Philips SyncMaster BX2031 support optimum resolution 1600*900) using onboard VGA without any problem. DVI to VGA converter used (MB Bios verion was BLH6710H.86A.0076). But i updated the bios to newest (BLH6710H.86A.0122). Then my monitor shows maximum resolution 1440*900 even i changed to the resolution 1600*900. I updated all drivers. But the problem is still there.
Report Comment
 
 
# RE: Resolution Problempinobot 2011-08-17 23:39
Try hotplugging you monitor. While the pc and monitor are on remove the cable from your monitor to your pc, wait a moment, and the reattach. It will reinitialize.
Report Comment
 
 
# home userChris 2011-08-28 01:29
I too am having system crashes with the DH67BL (2600k, 4g mem,Crucial c300 ssd, 2tb stockage drive). Typical use is internet intensive with for ex. emule,an hd video stream and an audio stream. For most streams to play smoothly I need to throttle emule (no prob there). The nasty part is that about every 8 hrs there's a system crash, sometimes with blue screen, usually without. The source seems to be due to the onboard graphics (drivers igfxpers.exe and igfxtray.exe). When I get a blue screen the message is always (paraphrasing, sorry : ) 'some processor timed out waiting for a signal from another processor'. All I can tell about the non blue screen crashes is that for some reason the graphics hardware and software somehow gets blocked up. Has anyone seen this? Also, how to know if i've got unrecalled i7 2600k and unrecalled DH67BL? Has anyone tried fixing this by installing a dedicated graphics card?
Report Comment
 
 
# Blue Screen errorNawshad 2011-09-19 20:22
I have got a Desktop PC configured with MB - Intel DH67BL & Processor - i3 2100. The Monitor connected is 'SA300 Series 20 LED Monitor' which has a VGA port only. Since the MB has DVI and HDMI ports only, have used a DVI-VGA adaptor to connect to the MB. I'm now facing blue screen error, when connecting to chat using Yahoo Messenger video call. The issue occurs when receiving a connection also. Is this the problem of adapter that I'm using or any other issues. Please Help.
Report Comment
 
 
# RE: Blue Screen errorDavid Ramsey 2011-09-19 21:17
Your problem is unrelated to the video adapter-- the software neither knows nor cares what your video output is. That said, I have no idea what the problem is.
Report Comment
 
 
# blue screenAmir 2011-10-05 04:00
i have i7 processor with DH67BL mother board with win 7 64bit, i am using vmware in it. when i open vm blue screen come up. i am having this blue screen on other software too.
Report Comment
 
 
# i72600k+D67BL3 bluescreen Freeze and unfreez automaticallysri 2011-10-24 20:57
hi
my system with dh67bl and i72600k with transcend ram8GB(4+4) with Win7 32bit

frequently it hangs (freezs and unfreezes for 1/2minuts) some times blue screen with 2nd processory did not revceive etx...

this is the problem somewhat similary to th "home user - Chris"..

thanks for the reply
Report Comment
 
 
# RE: i72600k+D67BL3 bluescreen Freeze and unfreez automaticallyOlin Coles 2011-10-24 21:01
You might consider running a stability test on your hard drive, but make sure to back up your important data first.
Report Comment
 
 
# RE: i72600k+D67BL3 bluescreen Freeze and unfreez automaticallysri 2011-10-24 21:19
hi
thnks for the spontaneaus and fast response..

you are definitely rocking....

thanks again...

soon post the info..

sri
Report Comment
 
 
# i72600k+D67BL3 bluescreen Freeze and unfreez automaticallysri 2011-10-25 23:59
hi

the prblem i found was with the SMPS 450watts from bulger company make...

due to the problems i switched OS to winxp3-32bit from win7-32bit..

i faced the same problem and the frezzing of the system increase now and then and finally there was no power supply to the motherboard..

So i replaced with another intex make 450watts and now the system didnot face any hangs freezs and the bluescreens...

i will check again and post if i face prblms...

thanks for the valuable informations...

keepit up

sri
Report Comment
 
 
# USB problempreparat 2011-11-10 01:56
Hi.I have Intel DH67BL.Before some days I noticed collapse in my keyboard and midi controller.They are USB powered .My PSU is 400W Fortron.The problem occurs when my air conditioner works and in some state of work keyboard is out of use for 1-2 seconds, the light on it is blinking several times in this moment.There are some pops in the sound monitors and midi controller goes out of connection with Cubase.I try all electricity circles in my apartment and the situation stays same.When my air conditioner works ,pops in the sound, keyboard outs for seconds and midi controller out of use in Cubase and other VST instruments.When air conditioner does not work all is fine.Can you give me some solution of this situation.I can't stay without conditioner in cold days and I can't use PC properly. I forget to say that all my PC equipment are connected to UPS(PC, monitor, sound monitors and all connected to PC devices).
Report Comment
 
 
# SATA port porblemKAKAR 2011-12-17 02:10
i m having trouble with my SATA ports firs they worked fine when all of the sudden two ports stopped working when i left the pc on overnight for torrent download now i have such a bad data transfer rate that the sound in video plays glichy ..and my processor get constantly used up to about 40-50 percent with nothing runnig (i5 2300 2.8 ghz) .... plz help
Report Comment
 
 
# MY System specsKAKAR 2011-12-17 02:15
2300 i5 2.8 6mc cache
dh67bl
4gb corsair 1600 MHz ram
2 x 500 gb WD hdds green(one with 16 and one with 32 MB cache)
nvidia GTX 460 SC graphics card
Cooler master 759 gx power supply
Report Comment
 
 
# alarm beeping after assembled systemNiroshan 2011-12-22 07:36
I assembled a system by my self with dh67bl mother board and after switching on the system it make an alarm just like beep I used 2 4gb 1333mHz Kingston ram an corei5 2500k processor
Report Comment
 
 
# RE: alarm beeping after assembled systemMindu 2011-12-23 21:24
Double check the system.
1) Remove all the components and wires connected to the motherboard and remove it from casing.
2) Check the processor, memory and power contacts (motherboard socket also). Contact may closed with some stickers or it may damaged.
3) If no problem with contacts, connect only Memory,Processor and the power supply unit. Keep motherboard outside the casing (Be careful to avoid short circuit. Assemble on some thing like telephone dictionary) and connect mains and power on the motherboard.
4) If alarm continues, i think you should go for the claim warranty..
Report Comment
 
 
# RE: alarm beeping after assembled systemNathan 2011-12-27 10:17
I had a DH67GD, and the product guide (downloadable from #intel.com, search for 'dh67bl product guide') has the beep codes explained in Appendix A. I would guess that most likely BIOS is not able to detect/configure memory for some reason. Either one of the DIMMs is not making good contact, they are not compatible with the CPU (which would surprise me), or maybe they are not installed in the right slots. Make sure your DIMMs are in the blue slots!

Beyond that, I agree with Mindu's advice. Another option would be trying to reset BIOS to default settings (remove the CMOS battery for about 30 seconds) or attempting to update BIOS through the recovery method (see "Recovering the BIOS" in the product guide).
Report Comment
 
 
# VGARAMJAN 2012-08-28 23:58
VGA KESE LAGEGE (VGA) KHAIN SPPORT HOGE
Report Comment
 
 
# PCI slotSTEVE 2012-11-05 22:28
Does anybody know if this motherboard would support a delta 10/10 sound card?
Report Comment
 
 
# PCI slotSTEVE 2012-11-05 22:30
Does anybody know if this motherboard will accept a delta 10/10 sound card?
Report Comment
 
 
# RAM UPGRADEMuthuKumar 2012-12-13 20:34
Can I upgrade my RAM to 32GB, with four of this 8GB module RAM

##ebay.in/itm/Corsair-8GB-DDR3-8GB-x-1-VS-Memory-Single-Module-1333MHz-RAM-CMV8GX3M1A1333C-9-/181036360556?pt=LH_DefaultDomain_203&hash=item2a269ba36c#ht_1263wt_906..
Report Comment
 
 
# sayeedsayeed 2012-12-28 04:53
Hi, I purchase DH67BL board and installed windows 2008 server, now I am not able to install LAN Drivers... is this board compatible with Server edition?

Thanks
Report Comment
 
 
# RE: sayeedDavid Ramsey 2012-12-28 06:15
Swayed, I don't know, but I don't see why it wouldn't be. I'd suggest you contact Microsoft Tech Support.
Report Comment
 

Comments have been disabled by the administrator.

Search Benchmark Reviews
QNAP Network Storage Servers

Follow Benchmark Reviews on FacebookReceive Tweets from Benchmark Reviews on Twitter