Antec DF-35 Dark Fleet Computer Case E-mail
Reviews - Featured Reviews: Cases
Written by David Ramsey   
Wednesday, 07 July 2010
Table of Contents: Page Index
Antec DF-35 Dark Fleet Computer Case
Closer Look: Dark Fleet Exterior
DF-35 Detailed Exterior Features
Closer Look: Dark Fleet Interior
DF-35 Detailed Interior Features
Final Thoughts and Conclusion

Antec Dark Fleet DF-35 Computer Case Review

Antec is one of the premier computer accessory manufacturers, and their cases have garnered a well-earned reputation for quality and features. Indeed, the Antec "Hundred" series of cases (the Two Hundred, Three Hundred, Six Hundred, Nine Hundred, and Twelve Hundred) are considered by many to be the benchmarks in their classes for cost-effective enthusiast level cases. Antec has just introduced their new "Dark Fleet" series, with several new models sporting an edgier style than they've previously shown. Benchmark Reviews examines the mid-tower DF-35 case to see how it fares against the competition.

Antec's been around since the mid-80s, and has been making computer cases almost that long. They produce cases for servers, for HTPCs, and for your grandmother's e-mail and web browsing machine. They make cases with no discernible market (the Skeleton series) as well as cases for gamers and enthusiasts. The Dark Fleet series is "...designed to meet the cooling and convenience demands of PC gamers and professional users." Well, there are a lot of cases designed to meet those demands; Antec's Dark Fleet series brings new styling, hot-swappable drive bays, and some serious cooling to the show.

antec df-35 mid-tower computer case review

Antec DF-35 Features and Specifications

  • Two Fleet-Release access doors open separately for convenient entry to drives
  • Top-loaded 2.5" hot swap SATA (SSD-compatible) drive bay
  • Two washable fan filters allow for easy cleaning
  • Bottom-mounted power supply isolates heat
  • CPU cutout for easy installation of CPU coolers
  • Cable management compartment organizes cables discreetly
  • 11 drive bays:
    • Up to 6 x internal 3.5"
    • 3 x external 5.25"
    • 1 x top external 2.5" hot swap SATA drive bay
    • 2 x internal 3.5" Fleet-SwapTM SATA drive bays (position changeable)
    • 1 x internal bottom-mounted 2.5" SSD bay
  • Advanced cooling system: - 1 x top 140mm TwoCool fan
    • 1 x rear white 120mm TwoCool fans with white LED
    • 2 x front variable-speed 120mm LED fans with white LED
    • 1 x side 120mm fan for graphics cards (optional)
  • 7 expansion slots
  • Maximum graphics card size: 11.5" / 292 mm
  • Stylish blacked-out interior
  • Windowed side panel
  • Front ports:
    • 2 x USB 2.0
    • Audio (AC'97 and HDA compatible) In and Out
  • Motherboards: Mini-ITX, microATX, Standard ATX
  • Power supply not included
  • Unit Dimension
    • 485mm (H) x 198mm (W) x 486mm (D)
    • 19.1" (H) x 7.8" (W) x 19.1" (D)
  • Weight: 15.1 lb / 6.9 kg

About Antec Inc.

Antec, Inc. is the global leader in high-performance computer components and accessories for the gaming, PC upgrade and Do-It-Yourself markets. Founded in 1986, Antec is recognized as a pioneer in the industry and has maintained its position as a worldwide market leader and international provider of quiet, efficient and innovative products. Antec has also achieved great success in the distribution channel, meeting the demands of quality-conscious system builders, VARs and integrators.

Antec's offering of enclosures includes a wide range of cases, such as its advanced Performance One Series, economical New Solution Series and VERIS family of media components designed for the home theater PC market. Antec's products also include front line power supplies, such as its premium Signature Series, powerful TruePower Quattro Series and EarthWatts, one of the most environmentally friendly power supplies available. PC gamers are an increasingly significant consumer of performance components, and many Antec products are designed for the gaming demographic, like the premier gamer enclosure: the Nine Hundred. Antec also offers a line of computer accessories comprising many original products, including its patented LED fans and notebook cooling solutions.

Antec is headquartered in Fremont, California, with additional offices in Rotterdam, The Netherlands, as well as in Germany, China and Taiwan. The company's products are sold in more than 40 countries throughout the world. Please visit www.antec.com for more information.



 

Comments 

 
# RE: Antec DF-35 Dark Fleet Computer CaseAdam 2010-07-08 04:23
Sweet mother of muffins that's ugly.
Report Comment
 
 
# Poor DesignRobert Johnson 2010-07-08 11:10
I have to agree with your review. Antec did not design this at all well and it is far overpriced. Antec needs to stop trying to figure out how to design PC cases and get feedback from gamers and other people that love to build their own PCs. If Antec doesn't watch out Cooler Master will steal all of their marketshare. If you decide to review the DF-85 I think you'll come to relatively the same conclusions that you did here
Report Comment
 
 
# RE: Poor DesignServando Silva 2010-07-08 11:40
I have to agreee on this one. What's up with Antec's new cases?
Other revisions are in the oven :).
Report Comment
 
 
# Safety RequirementsPaul Parkinson 2010-07-08 13:31
The reason that the power supply is oriented with the fan pulling air from inside the case is based on producing a design that actually meets the required product safety requirements in place in the US and other countries around the world. Any chassis that orients the power supply to pull external air via an opening in the bottom of the case does not have a suitable fire enclosure. Power supplies do die and they do pop capacitors or catch on fire. The openings in the bottom of a chassis with the fan oriented fan down simply run the risk of dropping material out of the chassis that may cause a fire. These incidents do happen and people try to sue the power supply and chassis manufacturer. Antec is simply doing it correctly.
Report Comment
 
 
# RE: Safety RequirementsDavid Ramsey 2010-07-08 14:11
So, you're saying that all those other cases that _do_ have bottom ventilation holes are in violation of some "product safety requirement"? I would think if there were such a requirement then those cases couldn't be sold here.
Report Comment
 
 
# Re Safety RequirementsPaul Parkinson 2011-03-05 06:40
There is no national law that says computer products (Technically ITE Information Technology Equipment)must meet product safety standards. The product safety standards are actually referenced in OSHA which deals with workplace safety and then each local electrical provider or local government is responsible for enforcing any product safety laws. Enforcement at the border when something is imported is limited to checking for counterfeit safety labels and not actual compliance. You can and people so sell products in this country that do not meet safety standards. Ask someone with drywall from China in their house.
Report Comment
 
 
# RE: Re Safety RequirementsDoug McKalip 2011-05-24 21:38
We repair computers and have seen a number of internal fires that I am sure the customers were glad they were contained within the cabinet. I even had a piece of audio gear, Russound CAV6.6, burn up in my house. My personal crusade to remove flammable material from consumer electronics can be seen at: ##itsonfire.org
Report Comment
 
 
# It does actually happen....BruceBruce 2010-07-08 15:53
Check out Austin's tale of woe here: #forum.benchmarkreviews.com/showthread.php?t=16145&highlight=damage

Also, Lian Li is using louvres on some of their new cases to reduce the risk: #benchmarkreviews.com/index.php?option=com_content&task=view&id=526&Itemid=61&limit=1&limitstart=3
Report Comment
 
 
# mrDale Lancaster 2010-07-25 13:02
3 x external 5.25" only 3? Don,t want supplied fans so to expensive case. pity would have bought this case. would replacing fans with new make be possible- Dale Lancaster
Report Comment
 
 
# RE: mrDavid Ramsey 2010-07-27 08:13
You could replace the supplied fans, but you'd lose the integrated controllers built into the existing fans (as I mentioned in the review).
Report Comment
 
 
# Just a pointAzaa 2010-12-06 13:56
quote

"The side panel fit is a little sloppy: even with the panels fully in place, there's about a 1/4" gap between the back of each side panel and the back of the case. "

I would like to point out that this is for cable management... which makes the air flow in this tower so much nicer. For the complaints on the drive bays there is also a FULL tower keep in mind this is mid and is trying to support optimal air flow because the better the air flow the better the entire machine will run.
Report Comment
 
 
# Lian Li for me sorry AntecJohn 2011-01-11 13:31
Disappointed with Antec's case design/quality lately.
Went with Lian Li PC-60FNWX instead
Report Comment
 
 
# interesting readwess 2011-03-05 01:29
After building a system for my friend yesterday on the DF-85 (the full size big brother of this DF-35) I was actually interested in picking one up and thought I'd see how much interior space I would "lose" between the two. looking for an image and review, google brought me here, and after reading this review, I am a bit confused.
As the owner of 3 antec nine hundred cases, I can tell you there is nothing wrong with the way the power supply being mounted the way it is. If you cannot understand the logic behind the engineering, perhaps you should not even be reviewing cases. I actually PREFER this design over the old "over the motherboard" design. traditionally with the powersupply mounted up high, it was sometimes the "only exhaust fan" running in the computer. With 140mm fan up top and 120mm in the back, let the fans do their job and let the power supply fan do the job its suppose to do, which is to cool the power supply. As for the hot swap 3.5" being useless without rails, does the harddrive not sit in the "slot" once inserted? I don't know about the df35 but on the full tower, when you slide a drive in, it just clicks and stays there. So having this the idea is so you can put in a hdd for "temporary use" quickly, where you don't need to open the case to connect sata / power cord I think it serve its purpose just fine.

I agree the price could've been lower and I didn't exactly like the looks of it at first glance, but once I finish building for my friend I liked the case enough to look into this. So if anyone reading this is interested in this case, check out the DF 85, If you have the space, its a much better case for not so much more.
Report Comment
 
 
# RE: interesting readMoe 2011-04-27 09:55
I agree with all you have replied too here, Wess
I ordered the 35 as it was $79.00 with free UPS shipping for the case & the rest of the order,
I to thought it was not that pleasing to the eye but after popping a few of the plastic swing brackets off & growing on me its really a half decent looking case along with its better attributes.
Big Case
Good Cooling, airflow
Holds lots of Hd?s
Bottom HS Bay made just for my SSD Drive
Top Hot Swap 2.5" Bay perfect for my media player HD (made just for me)
Bottom PS great with Sandy Bridge build
Installed the 2 SATA 3 on front of case rather than out the back, easily have both
fan filters are great, work well
Report Comment
 
 
# Antec... WHY???ReallyConfused 2011-04-28 17:38
WTHeck is with the "non-labeled headphone/mic jacks"... I really liked that feature when I bought the case, but when I got it I was like "Okay... Nothing telling me which is which, and I -don't- want to blow the plugs (which is what plugging the headphones/mic into the wrong plug WILL do), so what now?"

Does ANYONE who has this case know which plug is which?
Report Comment
 
 
# RE: Antec... WHY???Olin Coles 2011-04-28 17:51
Microphone should be on the left, and speakers on the right. You really can't blow your headphones/speakers by plugging into the wrong plug unless there's maximum output.
Report Comment
 
 
# Front FansArnold Frank Van Wie 2011-10-02 21:57
Can anyone tell me if the front fans can be turned off when complete quiet is needed from them?
Report Comment
 
 
# RE: Front FansDavid Ramsey 2011-10-03 12:55
As I recall, if you turn the fan controller knobs all the way counterclockwise, the fans will stop. However, they're very quiet even when they're operating.
Report Comment
 
 
# Front fansArnold Frank Van Wie 2011-10-03 15:29
Thanks very much David. I thought that would be the case. I should see if Antek has a manual for it on their web site.
Report Comment
 
 
# difference and front fansalex 2012-01-18 11:23
hey i got a df 35 for xmas and was wondering what is the difference between df 30 and the df 35 and also on mine (df 35) the fans do not move and light up... any help tyvm guys :)
Report Comment
 
 
# RE: Antec DF-35 Dark Fleet Computer CaseDavid Ramsey 2012-01-18 12:36
You can check Antec's web site for the specifications of the DF-30 and DF-35. If your fans aren't lighting up and moving, it probably means you don't have them plugged into fan headers on your motherboard.
Report Comment
 
 
# I got itChris Mintjes 2012-03-10 12:00
I've got this case for about one year now.
I must say that this case isn't that bad as you guys think.
I admit it's kind of cheap material used for the case, but the hotswap on top is pretty cool. My only problem is the light produced from the led fans... It's a bit to much IMO. I like to watch movies on my pc, but with the amount of light produced it isn't so great.
Except for that i think it's a great case for stronger pc's.
The cords are easily to put away.

And in black it looks so much better.
Report Comment
 

Comments have been disabled by the administrator.

Search Benchmark Reviews
QNAP Network Storage Servers

Follow Benchmark Reviews on FacebookReceive Tweets from Benchmark Reviews on Twitter