|G.Skill ECO 4GB DDR3 Memory Kit F310666CL7D|
|Reviews - Featured Reviews: Memory|
|Written by Servando Silva|
|Monday, 10 May 2010|
Page 4 of 9
G.Skill ECO 4GB SPD
CPU-Z shows 3 different JEDECs and the Xtreme Memory Profile for Intel Platforms. The XMP rates the memory at 667MHz (1333MHz DDR) with 7-7-7-23 latencies. Note the command rate is specified at 2T, but most likely support 1T as well. There´s always a JEDEC rated at 1.5v which ensures it will be compatible with any motherboard but you will lose the low-voltage ability. Those JEDECs are rated at 1036MHz, 1184MHz and 1333MHz at different latencies.
Just to verify those weird JEDEC frequencies were real we launched CPU Tweaker. This application gives us a wider view of the timings but the frequencies remain the same, so there´s no mistake. Hopefully, not supported low-voltage motherboards will use the 1333MHz 9-9-9 JEDEC.
Before start testing, we wanted to make sure the kit was able to do 1333MHz 7-7-7 at 1.35v. Memtest was good enough to let us know the kit was working flawlessly.
Memtest 4.0 has been running for 2 hours testing all unused RAM. At 112% coverage it doesn´t show any errors yet.