|RunCore Pro-V SandForce SF1200 SSD|
|Reviews - Featured Reviews: Storage|
|Written by Olin Coles|
|Thursday, 29 April 2010|
Page 7 of 12
ATTO Disk Benchmark
The ATTO Disk Benchmark program is free, and offers a comprehensive set of test variables to work with. In terms of disk performance, it measures interface transfer rates at various intervals for a user-specified length and then reports read and write speeds for these spot-tests. There are some minor improvements made to the 2.34 version of the program, but the benchmark is still limited to non-linear samples up to 256MB. ATTO Disk Benchmark requires that an active partition be set on the drive being tested. Please consider the results displayed by this benchmark to be basic bandwidth speed performance indicators.
Our basic bandwidth speed tests begin with the RunCore Pro-V SSD connected to the Intel ICH10 controller in AHCI mode, as the ATTO Disk Benchmark tools performs file transfers ranging from 0.5 KB to 8192 KB. The 200GB model we received reveals 286 MBps maximum read speed that plateaus from 32-8192 KB file chunks, and 277 MBps peak write bandwidth plateaus from 64-8192 KB. These exceeds the 260/260-MBps speeds suggested by SandForce and RunCore.
In the next section, Benchmark Reviews tests sequential performance using the CrystalDiskMark 3.0 software tool...