|Corsair Force F100 SandForce SSD CSSD-F100GB2|
|Reviews - Featured Reviews: Storage|
|Written by Olin Coles|
|Thursday, 22 April 2010|
Page 8 of 12
CrystalDiskMark 3.0 Tests
CrystalDiskMark 3.0 is a file transfer and operational bandwidth benchmark tool from Crystal Dew World that offers performance transfer speed results using sequential, 512KB random, and 4KB random samples. For our test results chart below, the 4KB 32-Queue Depth read and write performance was measured using a 1000MB space. CrystalDiskMark requires that an active partition be set on the drive being tested, and all drives are formatted with NTFS on the Intel ICH10 controller set to AHCI-mode. Benchmark Reviews uses CrystalDiskMark to illustrate operational IOPS performance with multiple threads. In addition to our other tests, this benchmark allows us to determine operational bandwidth under heavy load.
Our tests of the Corsair Force F100 Solid State Drive were each consistent, but only the maximum speeds were charted. Sequential tests on the Force F100 produced a maximum read speed of 210.7 MB/s, while the write speed was only 71.12 MB/s. The sequential file transfer speeds have traditionally been low with this benchmark tool, especially for SandForce controllers, which is why we will concentrate on the operational IOPS performance for this section.
CrystalDiskMark 3.0 reported 512K results of 196.7 MB/s read and 70.83 MB/s write performance. 4K tests produced 17.47 read and 60.23 write performance. 4KB queue depth 32 IOPS is one area where the Corsair F100 excels, and climbs to the top of our performance charts.
Displayed in the chart below, the maximum 4KB queue depth 32 IOPS performance results for several enthusiast-level storage products illustrate which products offer the best operation under load: