Archive Home arrow Reviews: arrow Cases arrow Thermaltake V3 Black Edition Case VL80001W2Z
Thermaltake V3 Black Edition Case VL80001W2Z E-mail
Reviews - Featured Reviews: Cases
Written by Colin Armstrong - Edited by Olin Coles   
Tuesday, 20 April 2010
Table of Contents: Page Index
Thermaltake V3 Black Edition Case VL80001W2Z
Closer Look: V3 Black Exterior
Detailed Exterior Features
Closer Look: V3 Black Interior
Detailed Interior Features
Final Thoughts and Conclusion

Closer Look: V3 Black Exterior

On the outside, the V3 features a generic, sleek look. Both the entire exterior and interior is coated in black. There is a honeycomb pattern placed on the top, bottom, front and back of the case, which allows for better airflow.

thermaltake_v3_exterior_angle.jpg

Two USB ports and audio + mic ports are positioned on the front-center of the case. On the right side are power and reset buttons, and on the right is an LED hard drive activity indicator.

thermaltake_v3_exterior_front.jpg

Again the honeycomb pattern is seen on the top of the case, which allows a large amount of heat to escape. One optional 120mm fan can be placed here, which will improve the ventilation.

thermaltake_v3_case_exterior_top.jpg

The left side of the case features a porthole-style window as well as a ventilation area positioned above the video card.

thermaltake_v3_case_exterior_side.jpg

Four rubber feet are positioned on the bottom of the case, which allow it to sit roughly 0.6-inch / 1.5 cm off the ground.

thermaltake_v3_exterior_bottom.jpg

A bright blue 120mm fan is found on the back of the case, as well as 7 expansion slots, and two pre-cut holes for water cooling.

thermaltake_v3_exterior_back.jpg



 

Comments have been disabled by the administrator.

Search Benchmark Reviews
QNAP Network Storage Servers

Follow Benchmark Reviews on FacebookReceive Tweets from Benchmark Reviews on Twitter