|Warpia Wireless USB Display Adapter SWP100|
|Reviews - Featured Reviews: Accessories|
|Written by Cyle Coles - Edited by Olin Coles|
|Sunday, 30 August 2009|
Page 4 of 7
Warpia SWP100 Detailed Features
The Video Base has two available outputs; HDMI (left), and VGA (center). Both outputs can be utilized simultaneously to display the same content but more control is gained by using two units as I found out during testing.
The AC adapter input is pictured above (center) to the right of VGA output. The Video Base does not have a power switch or on/off function so once the AC adapter is plugged in, the unit is on and waiting for signal from the PC Adapter.
Simply remove the Device Adapter and slide the shutter forward for vertical mounting of the Video Adapter. Reinsert the Device Adapter, plug in the AC adapter and display device and the Adapter Set is ready to transmit/receive.
Located on the lower third of the PC and Device Adapters is the LED power and network activity indicator. This LED will activate and flash green one time when the Device Adapter is powered up. After connectivity is established from the PC/notebook, both LED indicators will continuously flicker green signaling data is being transmitted.