Archive Home

Aeneon DDR3-1600 4GB XMP RAM AXH860UD20-16H E-mail
Reviews - Featured Reviews: Memory
Written by Olin Coles   
Thursday, 15 May 2008
Table of Contents: Page Index
Aeneon DDR3-1600 4GB XMP RAM AXH860UD20-16H
Aeneon DDR3 Features and Specifications
Closer Look: Aeneon PC3-12800
DDR3 Series Results
RAM Testing Methodology
Test Results: AXH860UD20-16H
XTune XMP Final Thoughts
AXH860UD20-16H DDR3 Conclusion

Introduction to DDR3

The new generation of DDR3 is meant to avoid a bottleneck between the CPU and the system memory; especially in highly overclocked scenarios. With the high-speed variety of DDR3, which presently includes everything beyond the highest 1600MHz JEDEC standard, you increase the Front Side Bus (FSB) and CPU clock speed without being forced to slow the system memory to remain stable. Here are a the primary benefits of DDR3 SDRAM:


  • Now supports a system level flight time compensation
  • Mirror-friendly DRAM pin out are now contained on-DIMM
  • CAS Write latency are now issued to each speed bin
  • Asynchronous reset function is available for the first time in SDRAM
  • I/O calibration engine monitors flight time and correction levels
  • Automatic data bus line read and write calibration


  • Higher bandwidth performance increase, up to 1600 MHz per spec
  • DIMM-terminated 'fly-by' command bus
  • Constructed with high-precision load line calibration resistors
  • Performance increase at low power input
  • Enhanced low power features conserve energy
  • Improved thermal design now operates DIMM cooler

Each generation of DDR is more than just an update to the memory speed, it is also a more technologically advanced production process and a lower operating voltage and better heat dissipation. The previous generation of DDR2 is manufactured on a 110nm node, whereas the new DDR3 has receives a fab process shrink down to a 90nm node (although some use 80nm) with either 55/45nm prepared for later into 2008. Together, this all helps the hardware enthusiast reach higher clock speeds at the expense of higher latencies. This is why the new DDR3 generation of memory needs a significantly higher clock speed deliver better performance than the preceding generation of DDR2 technology.

In additional to the logically progressive changes, there are also improvements made to the architectural design of the memory. One particularly important change introduced with DDR3 is in the prefetch buffer: up from DDR2's four bits to an astounding eight bits per cycle. This translates to a full 100% increase in the prefetch payload; not just a small incremental improvement as there have been in the other area's.

DDR2-400 Memory is equal in performance to DDR-400, which is why it must operate at DDR2-667 speed to carry incentive. The same scenario is generally true with DDR3 when compared to DDR2. While in theory DDR2-1066 offers the same performance as DDR3-1066, this generally means that DDR3 requires a DDR3-1333 speed to show any benefit over DDR2-800. Memories within the same generation (DDR/DDR2/DDR3) are downwards compatible, meaning that if you have DDR3-1600 RAM, you can configure it to operate at 1066 and 1333 MHz speeds.

DDR3 Test Products:

One of the nice benefits of owning a computer sales and service company is that I get to have my hands on a whole lot of inventory that I would never purchase for myself. The other benefit is that I get to make contact with many of the top names in the industry, and can often persuade them to lend us product for testing. Over the next several weeks, you can expect to see top-tier names like: Aeneon, Corsair, Crucial, GeIL, Kingston, SimpleTech, Mushkin, OCZ, Patriot, Winchip, and Super Talent in our featured DDR3 reviews for this mega-comparison round-up. The list below is just the beginning...

Benchmark Reviews DDR3 Testing Group

This review focuses on the Aeneon DDR3-1600 4GB XMP RAM Kit AXH860UD20-16H, however other individual reviews have been completed as part of our DDR3 Review Series. The comparison results displayed below are updated in real time as tests are completed.

Benchmark Reviews DDR3 Series Natural Overclock Results - Stock Voltage and Latency

Unfortunately, without the proper chipset to support high-speed DDR3 memory, anything beyond DDR3-1333 (the fastest selectable memory multiplier setting with most motherboards) will be relegated to overclocking. Intel has designed the entire 3 Series of motherboards to be DDR3 compatible; but even though the G33, P35, X38, and the upcoming X48 chipsets all support the newer standard they are still encouraging DDR2 support. This is going to be a power struggle between standards until Intel launches yet another new Front Side Bus.

But aren't we forgetting someone? Oh, that's right, Advanced Micro Devices. These days it's almost as if AMD has been late to dinner so often they don't even get a table setting anymore. While little brother (AMD) may have made claims back in 2006 to support DDR3 in their products this year, they appear to eating their words as the move has been stalled until the last half of 2008 when they will likely introduce the 45nm AM3. Which is what brings about the purpose of this article... is it all worth it? Benchmark Reviews has gone to great lengths to answer this question in our DDR3 RAM: System Memory Technology Explained article.


Comments have been disabled by the administrator.

Search Benchmark Reviews

Like Benchmark Reviews on FacebookFollow Benchmark Reviews on Twitter