Archive Home arrow Reviews: arrow Power arrow Hiper HPU-4M880 & HPU-4M630 Type M PSU's
Hiper HPU-4M880 & HPU-4M630 Type M PSU's E-mail
Reviews - Featured Reviews: Power
Written by Olin Coles   
Monday, 17 December 2007
Table of Contents: Page Index
Hiper HPU-4M880 & HPU-4M630 Type M PSU's
Type M Features and Specifications
Closer Look: Exterior Design
Closer Look: Cables and Wiring
Testing Voltage Ripple and Regulation
HPU-4M630 Test Results
HPU-4M880 Test Results
Final Thoughts and Conclusion

Type M Features & Specifications

The Hiper HPU-4M630 and HPU-4M880 represent the new ultra-efficient (85%) power solutions of the Type M Series with the well-known HIPER Mesh-Design in an environmental-friendly packaging. Both models comply with latest ATX12V v2.2 & EPS12V v2.91 form factors.

Hiper Type M Features

  • New PCI-E 8 pin available
  • NVIDIA SLITM- Ready Certified up to Dual GeForce 8800 Ultra.
  • 4 X independent 12V rails
  • Complies with latest ATX12V v2.2/EPS12V v2.91 form factors
  • Fully compatible with AMD 64 bit and Intel LGA processors
  • Active PFC
  • ExtenderTM cable kit
  • Gold plated connectors for minimum power loss and optimal conductivity
  • PCI-E,SATA,Molex with EZ-Grip, floppy, P4 & P8 connectors
  • 20 dB(A) under normal load

Type M HPU-4M630 Specifications

Wattage Rated Wattage 630 Watts
Peak Load 870 Watts
Switch Type Manual Rocker
Auto Standby ATX Logic
Fan(Intake) 135 x 1 35 x25 ~ R.P.M. 1000 ~ 1800 rpm
Bearing Type Sleeve Bearing
Input Parameter Voltage Range 100 - 240 V
Current 8 ~ 4 A
Frequency Range 47 ~ 63 Hz
Form Factor ATX12V 2.2
EPS12V 2.91
Efficiency ≈ 85%
Output Parameter +5V (± 5%) 2 ~ 28 A
+12V 1 (± 5%) 1 ~ 18 A
+12V 2 (± 5%) 1 ~ 18 A
+12V 3 (± 5%) 1 ~ 18 A
+12V 4 (± 5%) 1 ~ 18 A
-12V (± 10%) 0 ~ 0.8 A
+5Vsb (± 5%) 0 ~ 3 A
+3.3V (± 5%) 0.5 ~ 30 A
Output Load Regulation 12V1 & 12V2&12V3 &12V4 < 600 W
+3.3V & +5V < 170 W
+3.3V&+5V & +12V < 615 W
Output Voltage Protection +3.3V < 4.5V
+5V < 7V
+12V < 15.6V
Power Good Signal Rise Time < 20 ms
Signal On 100 - 500 ms
Signal Off 1 ms min.
Power Hold 16 ms min.
PFC Power Factor Correction Active
Chassis Thickness 1 mm
Unit Size Dimension 180 x 150 x 86 mm
7.1" x 5.9" x 3.4" mm
Weight Net Weight 2.4 Kg

Hiper_Type_M_600px.png

Type M HPU-4M880 Specifications

Wattage Rated Wattage 880 Watts
Peak Load 1040 Watts
Switch Type Manual Rocker
Auto Standby ATX Logic
Fan(Intake) 135 x 1 35 x25 ~ R.P.M. 1000 ~ 1800 rpm
Bearing Type Sleeve Bearing
Input Parameter Voltage Range 100 - 240 V
Current 12 ~ 6 A
Frequency Range 47 ~ 63 Hz
Form Factor ATX12V 2.2
EPS12V 2.91
Efficiency 85%
Output Parameter +5V (± 5%) 2 ~ 30 A
+12V 1 (± 5%) 1 ~ 18 A
+12V 2 (± 5%) 1 ~ 18 A
+12V 3 (± 5%) 1 ~ 30 A
+12V 4 (± 5%) 1 ~ 30 A
-12V (± 10%) 0 ~ 0.8 A
+5VSB (± 5%) 0 ~ 3 A
+3.3V (± 5%) 0.5 ~ 30 A
Output Load Regulation 12V1 & 12V2&12V3 &12V4 < 768 W
+3.3V & +5V < 180 W
+3.3V&+5V & +12V < 860 W
Output Voltage Protection +3.3V < 4.5V
+5V < 7V
+12V < 15.6V
Power Good Signal Rise Time < 20 ms
Signal On 100 - 500 ms
Signal Off 1 ms min.
Power Hold 14 ms min.
PFC Power Factor Correction Active
Chassis Thickness 1 mm
Unit Size Dimension 180 x 150 x 86 mm
7.1" x 5.9" x 3.4" mm
Weight Net Weight 2.6 Kg



 

Comments 

 
# RE: Hiper HPU-4M880 & HPU-4M630 Type M PSU'sLaszlo 2010-12-22 00:11
"these two programs have proven to create more power draw than anything else available"

That's maybe the truth, but OCCT in GPU Linpack mode worth a try! My PSU had no problem with OCd CPU & GPU running (MSI) Kombustor + OCCT CPU Linpack or Prime, but when I ran _only_ the GPU Linpack with OCCT then my PSU was shutted down right after the 1 min monitoring (2/2 times).

( Merry X-Mas Colin! )
Report Comment
 

Comments have been disabled by the administrator.

Search Benchmark Reviews
QNAP Network Storage Servers

Follow Benchmark Reviews on FacebookReceive Tweets from Benchmark Reviews on Twitter